Services

X-Surf 100 Network card for Commodore Amiga
X-Surf 100 for all Commodore Amigas with Zorro Slots
X-Surf 100 is a networking card for all Amiga computers with Zorro slots. For the Amiga A2000 or Zorro-daughterboards for the A1200, it will run at Z2 speed. If installed in an Amiga A3000, A4000 or the respective tower versions, it will run at Z3 speeds, which is up to five times faster than Z2. Key features:
  • 100MBit physical link rate
  • Sana-II device for use with OS2.0 up to OS3.9
  • Officially supported in the Linux-m68k kernel
  • Space- and power-saving design
  • Gold plated Zorro contacts and stainless steel metal bracket
  • Local expansion port for our high-speed USB module "RapidRoad"
Drivers can be downloaded from here. Manual here Wiki here Requirements:
  • TCP/IP stack such as Miami DX, AmiTCP, Genesis (included in OS3.9) or Roadshow
  • Sufficient RAM and 68020 CPU or higher
  • Kickstart/Workbench 2.0 or higher
  • File transfer method for drivers to be transferred to the Amiga
Transfer rates of over 1600kBytes/s have been measured with the X-Surf-100. Please note that the classic Amiga architecture and the current TCP/IP stacks for the Amiga don't allow saturating a 100MBit Ethernet link. Performance in your system may be slower due to CPU performance and programs running in multitasking. Please note that we cannot guarantee the X-Surf-100 to work in third-party Zorro boards as used in tower conversions, such as boards made by Eagle, Mikronik, RBM or Elbox. The X-Surf-100 may or may not work in these boards. Although the bus interface is designed to tolerate many mistakes that the vendors of those third-party boards have made, we can only guarantee proper operation in original Commodore daughter boards. Should the card fail to work in such a third-party board, you may have to close the Z2 jumper and downgrade to Z2 speed. For operation in Z3 computers, the Buster-11 chip is recommended. If there is only one DMA master in the Z3 system, a Buster-9 may also be used. Owners of the Merlin graphics card must have the latest hardware patches installed. Owners of the Mediator PCI/Zorro daughterboard must close the "swap" jumper. The X-Surf-100 is officially supported in the Linux-m68k kernel.    
£116.66 Ex. VAT Add to basket
MC68060RC50 REV 6 CPU Processor Amiga
MC68060RC50 REV 6 Genuine 68060 FPU/MMU CPU
MC68060RC50 REV 6 Genuine 68060 50Mhz processor with FPU and MMU. Perfect for any Amiga A1200 or A4000 accelerator including the TF1260 and BFG9060 for the A4000. When installing the processor in your Amiga, you will need to add the MMUlibs for 3.1 or the CPU library files if you have AmigaOS 3.2.   What's included: 1 x MC68060RC50 REV6 CPU   Video showing the CPU you will receive will be shared and WhichAmiga program will be used to confirm its revision.
£416.66 Ex. VAT Read more
Sega Saturn & Hitachi Hi-Saturn Recapping Service
Sega Saturn Recapping Service inc Hitachi Hi-Saturn
Sega Saturn and Hitachi Hi-Saturn motherboard recapping service. All board revisions for both Saturn and Hi-Saturn.   The service includes:
  • Testing of Sega Saturn/Hitachi Hi-Saturn
  • Removal of through hole and SMD Capacitors
  • Any leakage cleaned up and prepped.
  • Replacement Electrolytic capacitors like for like
  • Final testing
  Note this is not a repair service, recapping is a good preventative measure.
£37.49 Ex. VAT Read more
MEDIATOR PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ busboard is designed to enable the expansion of towered Amiga 1200 with a wide range of high-performance, low-cost PCI cards. New firmware embedded in CPLDs of MEDIATOR 1200 TX allows significant speed-up of graphic card operations when hardware 2D and 3D acceleration is used in single-processor systems (68k or PPC).   Features: - 6 PCI slots (PCI 2.2 compatible) - Power Management Interface - 66/33MHz PCI clock (transfer rate up to 264MB/s) - 32-bit PCI datapath - 4GB PCI memory space - Busmastering/DMA in all PCI slots - SDRAM/SGRAM of PCI gfx card as a fast DMA buffer - Interrupt controller (4 lines to each PCI card) - AT and ATX PSU connectors - Compatibility with 68030/040/060 and PPC turbo cards - Fits in any A1200 in D-BOX, E/BOX (Power, Winner), EZ-Z4 and Infinitiv tower   Software: - 2D graphic drivers for: Radeon 9200, Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee, - S3 Virge and S3 Virge DX PCI graphic cards - Warp 3D drivers working with Voodoo5, Voodoo4 and Voodoo3 graphic cards - TV tuner drivers for: most of available PCI TV tuners (over 100 models supported) - AHI sound drivers for: Sound Blaster 4.1 Digital, Sound Blaster 128 and - ForteMedia FM801-based sound cards (e.g. Terratec 512i Digital) - USB drivers for the Poseidon stack for: Spider and Spider II USB 2.0 cards - Network Sana-2 drivers for: Fast Ethernet 100Mbps PCI cards - Network Sana-2 drivers for: Ethernet 10Mbps PCI cards Current info about supported PCI cards is available in the Mediator Driver Guide. Package contents: - Mediator PCI 1200 TX black busboard - Mediator Multimedia CD - User's Manual   We can also supply the Elbox BlackBOX 1200 Tower case    
£266.66 Ex. VAT Add to basket
A1200 FPU Onboard Mod
A1200 FPU Upgrade (Onboard)
A1200 FPU upgrade (onboard) which includes socket, FPU and installation.
What does the modification do?
This FPU modification adds a real FPU to the A1200 motherboard, there has always been a place (U0) for an onboard FPU but it was never added. This is a perfect compliment for a stock A1200 or one with an accelerator without an FPU option, for example The TF1230 or any standard ram upgrade like the 11Mb Fast Ram upgrade. However there are a couple of limitations of adding an onboard FPU.
  • The FPU will be using the CPU clock which is at 14Mhz, which means the FPU will be running at 14Mhz
  • The FPU will be disabled if you use a 040 or 060 accelerator, for example TF1260. This is because both the 040 and 060 processors do not acknowledge external FPUs as you can get those processors with built in FPUs.
This modification is available as an option on our A1200 recapping service, ReAmiga 1200 and Refurbished units. Checkout this Youtube video by Chris Edwards   Process of ordering: Like our recapping service, you would need to send us your A1200 motherboard only. Once you have ordered you will receive an automated email with where to send the board and how to pack it.   [space_40]
£16.66 Ex. VAT Add to basket
Sum A600 USB Keyboard
Sum A600 USB Keyboard Adaptor
PRODUCT DISCONTINUED
Sum A600 USB Keyboard adaptor is a USB interface for HID keyboards (ONLY) without the need for installing additional AmigaOS software drivers. Device's installation procedure consists of simply attaching it the U7 chip located on A600's motherboard. Additional feature of the adapter is its "Bootloader" function allowing future firmware upgrades.
Sum A600 USB comes with dedicated configuration mode, which becomes available when you by pressing both the  Right-Shift + Pause keys together. User preferences are saved to the built-in EEPROM memory.
Key Features of the Sum A600
  • Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
  • A600 compatibility (U7 chip-attached).
  • Built-in USB stack.
  • Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
  • Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
  • Built-in EEPROM memory enabling user preferences storage.
  • "Bootloader" function allowing future firmware upgrades.
  • "Status" indicator LED providing information about device's state.
  • built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
  • Non-blocking keyboard A600 - You can still use the inbuilt A600 keyboard.
Entering configuration mode (R-Shift + Pause)
  • F1 - RESET type - software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
  • F2 - mapped Amiga Right to Alt Right,
  • F10 - view keycode (on / off),
  • F12 - display configuration
 
Amiga keys USB keyboard
Amiga reset CTRL + L-Win + R-Win CTRL + L-Alt + R-Alt CTRL + L-Alt + Del
Help F12
L-Amiga L-Win
R-Amiga R-Win
[space_40]  
£0.00 Ex. VAT Read more
Amiga A500 Custom Black & White
Refurbished Commodore Amiga 500 Custom

Commodore Amiga A500 – Professionally Refurbished White Edition

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU.
  • 1Mb Ram (512k slow, 512k fast).
  • 1.3 Kickstart Rom.
  • Internal Gotek Drive with side OLED display
What’s included?
  • Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
  • Brand new A500 Case White
  • Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts
What is Refurbished? Each Commodore Amiga A500 mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 worked as it did when it first came from the factory back in the 1980’s.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want to add some upgrades? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.   Worldwide shipping available simply contact us for a shipping quote.    Buildtime 4-6 weeks (Keycaps are on thier way to us).  
£399.99 Ex. VAT Select options
Atari 1040 STFM Refurbished
Refurbished Atari 1040 STFM

Refurbished Atari 1040 STFM.

Technical Specifications
  • Motorola 68000 (8Mhz) CPU
  • 1Mb Ram (Standard)
  • 3.5" Floppy Drive
  • UK Layout Keyboard
  • TOS V1.02
What’s included? Professionally refurbished Atari 1040 STFM inc Power lead (power cable will have correct plug depending on where its being sent). NOTE Cases may have a 520 STFM Badge but all our Atari STFM will have 1Mb of ram minimum.   What is Refurbished? The Atari STFM mainboard has been professionally recapped PSU. Each unit is thoroughly inspected and tested including:
  • Full Keyboard check.
  • Floppy drive read and write test.
  • Sound checked.
  • Video checked.
  • Case and keyboard is stripped and cleaned.
We can also perform the following Atari STFM fixs if required - ask for further details
  • 10K pull up resistor network to the DMA databus.
  • 1772 Pull up Resistors added.
  • STFM Reset fix 22uF added across C100.
  • Bus resistors replaced with 2.2k resistor arrays.
  • Full motherboard recap.
  Worldwide shipping available simply contact us for a shipping quote.    Images of the Atari STFM for illustrative purposes only, each unit will show signs of age and use.
£269.99 Ex. VAT Add to basket
Commodore 64 Replica Box (Breadbin)
Commodore 64 Replica Box (Breadbin) C64
PRODUCT DISCONTINUED Commodore 64 Replica Box (Breadbin), these are brand new and designed to be used as box art or to house your Commodore C64 Breadbin. These are true reproductions of the original boxes.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Commodore 64 C64C/C64II computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
  Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.    
£0.00 Ex. VAT Read more
Commodore 64 C64C/C64II Replica Box T2
Commodore 64 C64C/C64II Replica Box “T2”
Commodore 64 C64C/C64II Replica Box, these are brand new and designed to be used as box art or to house your Commodore 64C or 64II. These are true reproductions of the original boxes.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Commodore 64 C64C/C64II computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
  Please note: This is an Commodore 64 C64C/C64II reproduction box and NOT AN ORIGINAL.    
£0.00 Ex. VAT Read more
TF534 A500, A500+ Amiga Accelerator
TF534 Accelerator for Amiga 500/2000

NO LONGER AVAILABLE - TF536 IS THE REPLACEMENT

  TF534 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a ceramic Motorola 68030 CPU with an optional 68882 FPU clocked at 33mhz, 4MB of RAM, and a 2.5" IDE connector for an CF HDD Card. Full specs:
  • MC68030RP33B Processor
  • 4MByte of fast-ram.
  • 68882 FPU PLCC Socket (FPU option below)
  • 44 Pin IDE connector
  • Includes A500/A500+ CPU relocator
Prerequisites 
  • Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:
£0.00 Ex. VAT Read more
Checkmate 1500 Plus Build Service Amiga
Checkmate 1500 Plus Amiga A1200 Build Service
Checkmate 1500 Plus Amiga A1200 Build Service where we can free up your Amiga 1200 in to a Checkmate 1500 case allowing you to expand your Amiga to new heights! We can also offer upgrades as part of the build and of course recapping services. The Checkmate 1500 Plus cases are same as the ones you can purchase directly from checkmate1500plus.com however we don't sell the cases individually, the case is however included as part of our build service.
What does our service include?
  • A Checkmate 1500 Plus case (choice of Black or White).
  • Amiga A1200 rear I/O Panel.
  • Genuine Checkmate 1500 Plus 200W SFX PSU.
  • Transplant of your existing A1200 board or purchase one of our refurbished boards.
  • Installation of Amiga 1200 ATX Power adaptor kit.
  • Transplant of existing A1200 Floppy Drive.
  • Upgrade of Kickstart Rom to 3.1 (Licenced Cloanto)
  From this you can then add optional extras, for example housing your existing A1200 keyboard or an accelerator from the choices below, of course there are many upgrades which can be done but would be far too many to list and so many different combinations! If something is not listed please by all means contact us and select the option 'Checkmate 1500 Plus Build Service' from the drop down box and we would be happy to discuss options beyond the ones offered below. If you want to know more about the Checkmate 1500 Plus checkout their website   
£333.33 Ex. VAT Select options