Services
Showing 145–156 of 262 resultsSorted by popularity
28.6363 Mhz Crystal Oscillator for Amiga NTSC
28.6363 Mhz Crystal Oscillator for Amiga NTSC motherboards perfect for ReAmiga A1200, A4000 Replica and A2000 Replica motherboards that require NTSC timing for geograhical location use or for using an Amiga video toaster.
Also suitable for the following Commodore Amiga NTSC Computers:
- Amiga 500
- Amiga 500 Plus
- Amiga 600
- Amiga 1200
- Amiga 1500
- Amiga 2000
- Amiga 3000
- Amiga 4000
- Amiga 4000T
- Amiga CD32
- Amiga CDTV
A630 Rev 3 Accelerator (Bare board)
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card. designed for the the classic 68030 Motorola processor (NOT INCLUDED) running at 50Mhz and add an additional FPU (NOT INCLUDED). Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU socket for the Motorola MC68030 clocked on 50MHz CPU (CPU NOT INCLUDED)
- FPU socket for the 68882FN40 (FPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- The Oscillator will need some insulation tape put on top to stop the A630 touching it.
Amiga CD32 Capacitor Kit Polymer (Premium)
Amiga CD32 Capacitor Kit Polymer (Premium). Polymer capacitors compared to the 'standard' liquid electrolyte capacitors, organic polymer is a solid electrolyte, so these capacitors will never leak. These types are still within the Commodore specification compared to other type of capacitors that are used like tantalum or polymer tantalums which should be avoided.
We only use quality capacitors and use these in our own Amiga CD32 premium recapping service.
- Complete set of capacitors for Amiga CD32 mainboard
- Compatible with both PAL and NTSC models
- Compatible with 3,4 and 4.1 revisions
Package includes:
- Full set of SMD and through hole capacitors.
Nvidia PC Case Badge White
Nvidia PC Case Badge White, perfect for any PC case, add a touch of nostalgia from a great Nvidia era in PC history. These badges are printed on high quality white vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.
Atari ST PSU for Atari 520ST & 260ST
Atari ST PSU is a 50W strong, modern replacement power supply unit for Atari 520ST and 260ST computer systems using external power supply. PSU provides stable filtered 5VDC up to 4.0A, 12VDC up to 2.0A and -12VDC up to 0.5A. All by industrial grade AC/DC power supply. Carefully trimmed to offer best performance. The best and most affordable basic Atari ST external PSU replacement on the market. Can be upgraded to adjustable version offering 5VDC voltage fine tuning to set exact 5VDC for your particular system. The one and only absolute industry standard using the Mean-Well's RPT-60B as a base component.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.
Key features:
- ATARI 520ST, 520ST+, 260ST, 260ST+ compatible
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with round DIN 7-pin female plug
- Detachable input AC cable for all versions
- Weight only 0.4 KG (2x less than original Atari ST PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.
BFG9060 Amiga A4000 Accelerator Full 060 FPU
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and includes a full 68060 CPU running at 50Mhz with FPU and MMU.
- 68060 running at 50 Mhz.
- 128 MB of DMA Fast RAM.
- Temperature and voltage monitoring via I²C.
- Onboard 5V header to connect the optional CPU fan.
Amiga 500 Plus Mainboard Remake RAEMIXX500 PART BUILT
Amiga 500 Plus mainboard remake AKA Raemixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Raemixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
The Raemixx500 board has had a few improvements added compared to the original A500 Plus board:
- Kickstart Switches - You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
- DF0 Switch - Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!This is a fully built A500 Plus Raemixx500 board with all the custom chips and is plug and play, simply add your own kickstart rom or add one of the options below.
- Raemixx500 fully populated motherboard, NO Custom chips or ROM.
-
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws
- Custom Chips [space_40]
Super Nintendo (SNES) Recapping Service
Super Nintendo (SNES) Recapping Service inc all board revisions. This service is a maintenance service and not a repair service however recapping will extend the life of the SNES.
The service includes:
- Testing of the SNES
- Removal of through hole capacitors.
- Any leakage cleaned up and prepped.
- Replacement Electrolytic capacitors soldered in place
- Final testing and video taken of unit working.
A630 REV 2 Accelerator Turbo Card A600 NO CPU
A630 Rev 2 Accelerator Turbo Card (NO CPU VERSION) for the Amiga 600 is a modern turbo card allows you to add your own 68030 CPU. We have tested both the Gold top and ceramic versions, however we do recommend a CPU cooler and fan for the ceramic versions. The speed boost is the sweet spot for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost!
Full specs:
- 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
Refurbished Atari 1040 STE
Refurbished Atari 1040 STE.
Technical Specifications- Motorola 68000 (8Mhz) CPU
- 512Kb Ram (Standard)
- 3.5" Floppy Drive
- UK Layout Keyboard
- TOS V1.62
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and deep cleaned.
- 10K pull up resistor network to the DMA databus.
- 1772 Pull up Resistors added.
- STE Video Ghosting Fix Applied.
- STE Reset fix 22uF added across C100.
- Bus resistors replaced with 2.2k resistor arrays.
- TOS Upgrades.
- RAM upgrades
- Internal Gotek Drives
Sinclair ZX Spectrum 128k +2 +3 Recapping Service
Sinclair ZX Spectrum recapping service, the following models are covered using this service:
- Sinclair ZX Spectrum 128K +2 +3
- Sinclair ZX Spectrum 128K (toaster)
- Check of the board before recapping is begun.
- Removal of existing capacitors (radial capacitors).
- Cleanup and preparation of area.
- Replace using tier one capacitors.
- Retest (Video, Audio)
Sinclair ZX Spectrum 16K/48K Recapping Service
Sinclair ZX Spectrum recapping service, the following models are covered using this service:
- Sinclair ZX Spectrum 48k
- Sinclair ZX Spectrum+ (Plus)
- Check of the board before recapping is begun.
- Removal of existing capacitors (radial capacitors).
- Cleanup and preparation of area.
- Replace using tier one capacitors.
- Retest (Video, Audio)