Services

A630 Rev 2 Accelerator A600
A630 REV 2 Accelerator Turbo Card A600 NO CPU
A630 Rev 2 Accelerator Turbo Card (NO CPU VERSION) for the Amiga 600 is a modern turbo card allows you to add your own 68030 CPU. We have tested both the Gold top and ceramic versions, however we do recommend a CPU cooler and fan for the ceramic versions. The speed boost is the sweet spot  for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost! Full specs:
  • 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
  • 64MB SDRAM Fast Ram.
  • Cooling: Passive or Active. No heatsink or fan is included, options are below.
  • PCMCIA Friendly.
 
Important Information:
 
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1  Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here   PCB colour will vary.    
£83.33 Ex. VAT Read more
Commodore CDTV PSU Adaptor
Commodore CDTV PSU Adaptor
PRODUCT DISCONTINUED   Commodore CDTV PSU his has been designed to allow you to replace the existing power supply inside the CDTV. You can use a regular or picoPSU ATX power supply. Does not include any PicoPSU.or ATX PSU Designed and built by Ian Stedman
£0.00 Ex. VAT Read more
TF330 Amiga CD32 with TF Riser USB
TF330 CD32 Accelerator with TF CD32 Riser
NO LONGER BEING PRODUCED TF330 CD32 accelerator a perfect upgrade for your Amiga CD32. Included is a gold top Motorola 68030 CPU clocked at 50mhz, 64MB of RAM, 2.5" IDE connector for an CF HDD Card, RGB socket, 2 x USB HID ports. Full specs:
  • MC68030RC50C Processor
  • 64MByte of fast-ram.
  • 44 Pin IDE connector
  • Buffered DB23 (RGB out)
  • 2 x USB HID ports with following support
    • HID Keyboard support
    • HID Mouse
    • Support for Keyboard & Mouse combo
    • Support for standard HID Gamepad :
    • In Joystick mode with 3 buttons
    • In CD32 Gamepad mode
  • RTC - M6242 emulation - (Battery as an option)
Prerequisites 
  • USB HID Keyboard/Mouse/Joypad
What are USB HID Ports?
USB human interface device is a part of the USB specification for computer peripherals: it specifies a device class (a type of computer hardware) for human interface devices such as keyboards, mice, game controllers and alphanumeric display devices. Using USB HID Ports
  • After inserting USB HID devices (mouse, gamepad, keyboard + mouse combo) require to override the CD32 onboard game ports and are disabled and you need to use USB devices. You cannot mix and match. Override is indicated by LED2. Only a USB Keyboard can be used with the onboard CD32 game ports.
Supported USB devices: Most standard USB HID mouse, keyboards and PC Gamepads. Some mouse with more than 3 buttons don't work correctly, and combos with Bluetooth receivers.
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:    
£249.99 Ex. VAT Read more
Amiga PSU DUO Amiga A500-600-1200 and CD32
Commodore Amiga PSU for A500/600/1200 & CD32 (DUO Edition)
Commodore Amiga PSU DUO EDITION for 1 x A500/A600/A1200 and 1 x Amiga CD32 up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200 and Amiga CD32. The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • 1 x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
  • 1 x CD32/A590 compatible (round 4pin DIN plug)
  • Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
  • Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
  • Stabilized -12VDC up to 0.15A rated output
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
  • Double over current protection, individual for each output
  • Durable main AC power On/Off switch
  • Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
  • Eco friendly design: consumes ~20% less power compared to original PSU set
  • Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
  • Detachable input AC cable allowing you to use your own desired cable length (cable included)
  • Weight only 0.3 KG
  • Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
  • Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
Checkout Ravi Abbot Review: [kad_youtube url="https://youtu.be/lqZuQ2S5TL4" ]
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£79.16 Ex. VAT Add to basket
Amiga 600 Wild Weird Wicked Reproduction Box
Amiga 600 Reproduction Box – Wild Weird Wicked
PRODUCT DISCONTINUED Amiga 600 reproduction box - Wild Weird Wicked, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original Amiga 600 boxes created by plakativ-druck.ch.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Amiga A600 computer and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.  
£0.00 Ex. VAT Read more
Amiga PSU Boost A500 - A500 Plus
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200. The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Commodore Amiga 500, 500+, 600, 1200 compatible
  • Stabilized & filtered 5VDC up to 8A output (peak)
  • Stabilized & filtered 12VDC up to 0.5A output
  • Stabilized & filtered -12VDC up to 0.15A output
  • 5VDC manual adjustment feature (potentiometer)
  • Factory calibrated for stock Amiga 500 reference load
  • Active & passive over voltage protections for main +5VDC line
  • Over current protection for all output lines
  • Integrates Protection & Adjustment LED Module add-on
  • Fully isolated & fused on AC side
  • Durable power On/Off switch (black)
  • Status LED (Good Status Green)
  • Long output cable (1.8m) with rectangular DIN 5-pin plug
  • Detachable input AC cable for all versions (cable included)
  • Weight only 0.4 KG (2x less than original PSU)
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£66.66 Ex. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2 ROM Burning Service for Amiga A4000
AmigaOS 3.2 ROM Burning Service for Amiga A4000, within this service we will burn the AmigaOS 3.2 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 4000.
What you will receive:
  • Physical AmigaOS 3.2 Kickstart HI ROM
  • Physical AmigaOS 3.2 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.  
£19.16 Ex. VAT Read more
Geo's Quest Box Set for the Commodore Amiga
Geo’s Quest Box Set Commodore Amiga

Geo's Quest series is a loose parody of the Commodore story told in a humorous, satirical and absurd humorous way following the main character, George Angus. There are 9 chapters in the story of which 5 are included in the box set. (Chapter 6 “There be Cows” is currently in development and an LHA of the Chapter and PDF Chapter Manual will be sent to the purchaser upon completion - anticipated date early 2025.) This is a truly retro series developed on Amigas for Amigas. All coding, Graphics, Animations, Music, Sounds, Text, even the Manuals were developed on an A1200 and A600, in glorious 320 x 200, 32 Color Low Res. Using AMOS, Gr.A.C.2, Personal Paint, OctaMed, Amigawriter, AmiPDF and various utilities.

The entire endeavor is the work of one person Paul Golian who started in 2000, was shelved in 2002 and then 20 years later upon retirement resurrected culminating to these first 5 chapters.

Included in the Box Set you find the following:

  • Game CD with both GQ2 “In Search of Queen Lorraine” & GQ3 “Gateway to Nowhere (part 1)” in both NTSC & PAL versions (GQ2 has 1 version for both) and Game Manuals in PDF format.

  • Game SD with both GQ2 “In Search of Queen Lorraine” & GQ3 “Gateway to Nowhere (part 1)” in both NTSC & PAL versions (GQ2 has 1 version for both) and Game Manuals in PDF format.

  • Printed Color Glossy Game Manuals for both Games.

  • Printed Color Glossy Game Maps for both Games.

  This game comes on physical media.  

What You Need to Play

An Amiga, Emulated Amiga with 2.0 + ROM, 2MB Chip Ram with a minimum 1.65MB Free and 36MB Free Hard Drive Space for both games. It is recommended to use an accelerated Amiga (‘020 or greater) for a smoother game play experience.

 
£19.99 Ex. VAT Add to basket
Commodore C64 C64C Case Brand New Transparent
Commodore C64 C64C Case Brand New Transparent
Commodore C64 or C64C brand new cases. If your C64 is yellowed, has signs of wear, ugly holes, or you just want to give some love to your Commodore 64, then one of these cases is right for you. You could even build a brand new C64, rehouse your existing motherboard and keyboard, or even install the Keyrah v3. "Retro Black" colour scheme following the colours of the Commodore 264 series (C16, C116 and Plus/4 computers). Package includes:
  • Top half of case with sticker applied
  • Bottom half case without sticker
  • Two rubber stands, ten self-tapping plastic screws
  • User guide (colour printed)
  • White box with "Commodore" logo stickers
  • Shipping includes outer (brown) box
   
£62.49 Ex. VAT Add to basket
Intel Pentium III PC Case Badge Black
Intel Pentium III PC Case Badge Black
Intel Pentium III PC Case Badge Black, perfect for any PC case, add a touch of nostalgia from a great Pentium 3 era in PC history. These badges are printed on high quality white vinyl finished with a gel epoxy bubble giving that classic PC badge look and feel.  
£2.08 Ex. VAT Read more
RAMIXX500 RAEMIXX500 A500 Motherboard
Amiga 500 Plus Mainboard Remake RAEMIXX500 PART BUILT
Amiga 500 Plus mainboard remake AKA Raemixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Raemixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included. The Raemixx500 board has had a few improvements added compared to the original A500 Plus board:
  • Kickstart Switches - You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
  • DF0 Switch - Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!This is a fully built A500 Plus Raemixx500 board with all the custom chips and is plug and play, simply add your own kickstart rom or add one of the options below.
  What's included?
  • Raemixx500 fully populated motherboard, NO Custom chips or ROM.
  What's not included?
      • Both bottom and top shield
      • Kickstart Rom
      • Screws/Hex Screws
      • Custom Chips
    [space_40]
Built to order 3-4 weeks.
£324.99 Ex. VAT Select options
Amiga picoPSU Adaptor
Amiga PicoPSU Adaptor – A500, A600, A1200
PRODUCT DISCONTINUED   Amiga PicoPSU Adaptor suitable for the A500/A600/A1200. The right angled connector provides a lower profile. You can operate the unit using a toggle or push to make switch. A 90W PicoPSU power supply, with a 60W mains adaptor, has been sufficient to operate an Amiga 600 and Amiga 1200 with a 040 and CD-ROM. PCB dimensions, 51x51mm Does not include any PicoPSU. Designed and built by Ian Stedman    
£0.00 Ex. VAT Read more