Atari 520 STe / 1040 STe / 4160 STe Recapping Service inc PSU
£74.99 Ex. VAT
Atari 520 STe / 1040 STe / 4160 STe recapping service including recapping of STe PSU, all board revisions. This service includes both recapping of the Atari STe motherboard and PSU.
- Check of the STe motherboard and PSU before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the Atari STF / STFM
What do you need to send?
All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.
You may also like…
Atari Lynx Recapping Service MK 1 or MK 2
Overseas recapping orders
Overseas orders are very welcome and we are able to provide you return shipping costs at the checkout. To do this add any of our recapping services to your shopping basket and then at the checkout simply fill in the billing and shipping form including your telephone and email address (important) and click the 'Request a quote' link. You will receive an email within 24hrs with the shipping cost and you can then proceed with the order by clicking on the 'Complete your order' within the email. There is no need to leave the checkout page open your web browser.Atari 520 STF / 1040 STF Recapping Service inc PSU
- Check of the STF motherboard and PSU before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
Atari 520 STFM / 1040 STFM Recapping Service inc PSU
- Check of the STFM motherboard and PSU before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
Atari Falcon Recapping Service inc PSU
- Check of the Falcon motherboard and PSU before recapping is begun.
- Removal of existing capacitors.
- Clean-up and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
Related products
Refurbished Atari 1040 STFM
Refurbished Atari 1040 STFM.
Technical Specifications- Motorola 68000 (8Mhz) CPU
- 1Mb Ram (Standard)
- 3.5" Floppy Drive
- UK Layout Keyboard
- TOS V1.02
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.
- 10K pull up resistor network to the DMA databus.
- 1772 Pull up Resistors added.
- STFM Reset fix 22uF added across C100.
- Bus resistors replaced with 2.2k resistor arrays.
- Full motherboard recap.
Atari ST Gotek Drive, OLED Display and FlashFloppy
Refurbished Atari Falcon 030 Computer
Refurbished Atari Falcon 030
Technical Specifications- Motorola 68030 (16Mhz) CPU
- 4Mb Ram
- 3.5" 1.44mb Floppy Drive
- QWERTY Keyboard Layout
- NVRAM/RTC replacement module installed
- Clock patch module
- 14Mb Ram upgrade
- Professionally refurbished Atari Falcon inc Power lead (power cable will have correct plug depending on where its being sent).
- Recapped both motherboard and PSU.
- Full Keyboard check.
- Floppy drive read and write test.
- Sound checked.
- Video checked.
- Case and keyboard is stripped and cleaned.
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer
Greaseweazle v4.1 allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed - PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE)
Greaseweazle V4.1 is the latest version, updated for mass production and with the following features:
- Reads and writes 3", 3.5", 5.25", 8" disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25" and 8" disk drives
- Integrated power connector for directly powering most 3.5" disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25" drives
- Supports Disk-Change detection as used by Rob Smith's integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8" interface REDWC signal)
- 100% factory tested, and tested again by me before shipping
More information and documentation on the wiki page here:
This listing is for the Greaseweazle V4.1 device only. And does not include which you will require:
- A disk drive (for example a PC 3.5" or 5.25" drive)
- A floppy ribbon cable (typically you want a standard PC cable with 'twist' on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply