Back to Amiga A600
Amiga 600 Reproduction Box – Wild Weird Wicked
£0.00 Ex. VAT
PRODUCT DISCONTINUED
Amiga 600 reproduction box – Wild Weird Wicked, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original Amiga 600 boxes created by plakativ-druck.ch.
Key features:
- Box is true to the original size and design.
- Including “Innards” for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.
PRODUCT DISCONTINUED
You may also like…
Commodore Amiga PSU for A600
Commodore Amiga PSU for A600, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga 600 Case Badge – Vampire
Amiga 600 Case Badge - Vampire brand new, perfect replacement for any A600 case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 600 case!
Amiga 600HD Reproduction Box
PRODUCT DISCONTINUED
Amiga 600HD reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600HD. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600HD was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600HD reproduction box and NOT AN ORIGINAL.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600HD computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600HD reproduction box and NOT AN ORIGINAL.
%20Reproduction%20Box&url=https://www.retropassion.co.uk/product/amiga-600-reproduction-box/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/08/IMG_1672-scaled.jpg?fit=1024%2C683&ssl=1){kind=link}
Amiga 600 (A600) Reproduction Box
PRODUCT DISCONTINUED
Amiga 600 (A600) reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600 was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
&url=https://www.retropassion.co.uk/product/amiga-psu-a600-boost/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/07/Amiga_003_M_640.jpg?fit=640%2C480&ssl=1){kind=link}
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Related products
A630 Rev 3 Accelerator 68030 50Mhz inc FPU Amiga A600
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 - synchronous or asynchronous clocking.
- 64MB SDRAM Fast Ram.
- Cooling: Active included.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
- PCB Colour will vary.
Amiga 600/1200/4000 IDE Header Replacement
Amiga 600/1200/4000 IDE Header (Socket) Replacement
This service replaces the 44pin IDE header on an Amiga 1200 with a brand new socket. Price includes FREE UK return shipping.
Amiga A600 1Mb Chip Ram Memory Expansion
Amiga A600 1Mb Chip Ram upgrade fits in the trapdoor of the Amiga 600. These cards are brand new and perfect in giving your Amiga 600 a little boost and compliments the Amiga 600 8Mb Fast ram upgrade as 2Mb chip ram is recommended if your looking to start using WHDLoad.
What is WHDLoad?
WHDLoad is a a solution where by the user can install hundreds of Amiga games on to a HDD/CF or SD card even if the game originally did not have the option of installing the game on to the internal HDD/CF/SD card. The vast majority of games have already been converted ready to go or you can create them yourself if you have the original game on a floppy disk/s. Also many great Amiga demos have been converted for WHDLoad.
1 Year RTB Warranty.
Amiga A600 4Mb Fast Ram Module
This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.
Amiga A600 4Mb Fast ram module provides 4Mb of fast ram in your Amiga 600 works with all revisions of mainboard and simply plugs on top of the A600 processor. The benefit of having 4Mb of fast ram is that it opens up the world of WHDLoad as the recommended minimum of fast ram is 4Mb in an OCS/ECS Amiga. It is strongly recommended that an extra 1Mb chip ram is also present (total of 2Mb chip). Each unit is hand built and tested for 24 hrs. and built to order an take approx 3 working days from order.This unit has been superseded with the A600 8Mb Fast Ram version which you can switch between 4Mb and 8Mb fast ram.