Back to Amiga A600
%20Reproduction%20Box&url=https://www.retropassion.co.uk/product/amiga-600-reproduction-box/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/08/IMG_1672-scaled.jpg?fit=1024%2C683&ssl=1){kind=link}
Amiga 600 (A600) Reproduction Box
£0.00 Ex. VAT
PRODUCT DISCONTINUED
Amiga 600 (A600) reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600 was shipped.
Key features:
- Box is true to the original size and design.
- Including “Innards” for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL.
NO LONGER BEING PRODUCED.
PRODUCT DISCONTINUED
You may also like…
&url=https://www.retropassion.co.uk/product/amiga-psu-a600-boost/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/07/Amiga_003_M_640.jpg?fit=640%2C480&ssl=1){kind=link}
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Commodore Amiga PSU for A600
Commodore Amiga PSU for A600, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga 600 Case Badge – Vampire
Amiga 600 Case Badge - Vampire brand new, perfect replacement for any A600 case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 600 case!
Related products
%20with%20Printed%20Mount,%203%20Digit&url=https://www.retropassion.co.uk/product/amiga-600-1200-gotek-with-3d-printed-mount-digit-display-and-flashfloppy/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2019/02/IMG_8216.jpg?fit=1024%2C768&ssl=1){kind=link}
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600.
You will need a USB memory stick (NOT included) with your loaded ADF files.
Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added.
A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
-
Corrected PCB layout, removed “nowhere” traces.
-
Main Vcc rails stronger.
-
Informative silkscreen.
-
Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
-
CXA2075M Video Encoder
-
DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
-
R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
-
HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.
Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive.
The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install.
What you will receive:
- 3D Printed Header
- OLED Display
- 30cm of cable from the header to the Gotek drive.
Refurbished Commodore Amiga 600 Unit
Commodore Amiga 600 – Professionally refurbished
Technical Specifications- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 2.04 Kickstart Roms
- 3.5" Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga 600 Unit (excluding mouse and PSU), these are options that can be added.
Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]
[caption id="attachment_17766" align="aligncenter" width="300"]
Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption]
Want up add some extras?
We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc.
Shipping
UK shipping will be via Parcelforce and shipping cost will be calculated the checkout.
Worldwide shipping available simply contact us for a shipping quote.
Ordering
We only ask for a deposit and the rest upon completion.
Images of the Amiga 600 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 600 we have please contact us.