Back to Refurbished Units
Amiga A4000D Replica Motherboard Fully Built

Amiga A4000D Replica Motherboard FULLY BUILT

£1,399.99 Ex. VAT

Amiga 4000D replica motherboard FULLY BUILT using 99.9% new* parts. these boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community.

 

What’s included:

  • Amiga A4000D Replica PCB in Black.
  • 99.9% new* components (DB23 port is a recycled component).
  • Includes all custom chips (new old stock).
  • Fully tested, just add daughter board, CPU card, fast ram and chip ram.

 

These are built to order and can take between 6/8 weeks, a 25% non refundable deposit is required. We can offer daughter boards, kickstart roms, 72 Pin Simm ram or CPU cards if required. No battery holder included.

 

*Custom chips are new old stock and have not been removed from working original boards, all other parts a brand new except for DB23 video port

 

 

SKU: A4000-REPLICA-BUILT Category: Tags: ,

You may also like…

BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000 Accelerator Full 060 FPU
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and includes a full 68060 CPU running at 50Mhz with FPU and MMU.
  • 68060 running at 50 Mhz.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Onboard 5V header to connect the optional CPU fan.
  *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. Installation guide here [hr]   For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.   [space_40]
£708.33 Ex. VAT Add to basket
BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000/A3000 Accelerator (No CPU)
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and provides a CPU socket that supports:
  • 68040 running at 25Mhz (our cards are set up for 68060 CPUs ONLY)
  • 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Overclocking capability up to 100 MHz with full 68060 Rev. 6 CPUs ONLY with heatsink and fan (we don't offer support for overclocking or damage).
  • Onboard 5V header to connect the optional CPU fan.
  *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. Installation guide here [hr]   For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.   *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. [space_40]
£333.33 Ex. VAT Select options

Related products

A2000 Replica Motherboard
Amiga 2000 Replica Motherboard FULLY BUILT
Amiga 2000 Replica Motherboard fully built with all custom chips including Buster with an option of an additional 1Mb Chip ram upgrade to take it to a total of 2Mb of chip ram which is perfect as a start for WHDLoad with a TF534 or TF536 Accelerator card. This board is a replica of the A2000 rev 6.2 motherboard reverse engineered by Floppy209. The unit was built from both new parts and recycled parts.    
£1,199.99 Ex. VAT Add to basket
Re-Amiga A1200 Build Service
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using an A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
  • Composite Video area changed to a new decoder for improved quality.
  • VGA Connector added, VGA monitor needs to support 15Khz!
  • S-Video Connector for S-Video Out
  • Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
  • PCMCIA Reset fix.
  • Optional IRQ7 Switch.
  • Native PAL or NTSC Option (below)
  • Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
  • Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
  • Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
  • 9 Pin Mouse Port
  • Fits in your current metal shielding**
  This is a build service using a donor board you provide or provide the needed parts to complete the build. We are able to provide a donor board if required, ask for further details.    Once ordered we will request a 10% deposit to secure the service and send the you the address where to send you A1200 donor board.   * Custom chips will be tested before hand, any custom chips which are faulty we will contact you and send a quote for the any faulty chips or parts. ** ReAmiga board does not come with any metal shielding.   
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unaviable.
   
£699.99 Ex. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 ROM Burning Service for Amiga A4000
PRODUCT DISCONTINUED AmigaOS 3.1.4 ROM Burning Service for Amiga A4000, within this service we will burn the AmigaOS 3.1.4 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 4000.
What you will receive:
  • Physical AmigaOS 3.1.4 Kickstart HI ROM
  • Physical AmigaOS 3.1.4 Kickstart LO ROM
NOTE NO License is included for AmigaOS 3.1.4 or 6x floppy ADF files are included, this is purley a burning service, However we are able to supply AmigaOS 3.1.4 inc Kickstart ROM and AmigaOS ADF disks here
The Process:
This service requires proof of your purchase of the digital version of AmigaOS 3.1.4 (for example screenshot of your purchase from the Hyperion website). Please note ONLY customers who already bought digital version of AmigaOS 3.1.4 can purchase this service. If the buyer is unable to provide proof of the purchase from the Hyperion website the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation of the order from the Hyperion website or a screenshot of the confirmation email using the upload tool below. If your purchasing more than one set of ROMS, you will need a licence per ROM set.
We are proud to be an official Hyperion reseller.  
£0.00 Ex. VAT Read more
Amiga A4000D Replica Part Built Birdseed Only
Amiga A4000D Replica Motherboard Part Built (birdseed only)
Amiga A4000D replica motherboard which has been part built with all the 'birdseed' components soldered in place which are SMD ceramic resistors and capacitors ONLY. These boards are based on the A4000 Rev B motherboard and organized by Paul Rezendes (ACILL) and the and was directly funded by the contributions of the Amiga Community. What's included:
  • Amiga A4000D Replica PCB in Black
  • All SMD ceramic capacitors and resistors soldered
  You will need to source further parts to make this a functional motherboard.   We also offer a fully built A4000D Motherboard here
£99.99 Ex. VAT Add to basket