scandoubler

ScanPlus AGA Amiga 1200/4000D
ScanPlus AGA – Amiga 1200 and Amiga 4000D Scandoubler
ScanPlus AGA is a internal Scandoubler for the Amiga 1200 and Amiga 4000D (not Amiga 4000T or Amiga CD32). The advantage of the internal ScanPlus AGA is that it will allow you to connect to a standard VGA monitor whether that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector. The primary PCB sits over the Lisa chip and the smaller PCB sits over the Alice chip. Output connector connects to a VGA socket which sits in a 3D printed backplate which is included (available in white or black, please note white will be sent if no note is made asking for black). ScanPlus is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are available via the VGA connector, these include Multiscan, PAL, NTSC, DoublePAL DoubleNTSC, Euro36, Euro72, Super72. It provides smooth 50-60 Hz and up to 24 bit colour depth. What's included:
  • ScanPlus AGA (Lisa and Alice PCB's).
  • VGA breakout socket.
  • White Backplate for VGA socket (please but a note on the order to ask for Black if required instead).
  • Ribbon cable to connect to VGA socket.
  • Link cable to Alice PCB.
  • DPMS screensaver utility included - Download here
  • Item is brand new.
  • Installation guide is here
 

Note:

  • Not retail boxed.
  • Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
£124.99 Ex. VAT Read more
Indivision MK3 AGA for Amiga A1200 and A4000T
Indivision AGA MK3 Flickerfixer for A1200 and A4000T
Indivision AGA MK3 for the A1200 and A4000T* (Not A4000D Desktop) providing both a VGA connection or HDMI so you have the flexibility of using a CRT/LCD PC monitor with VGA or a large TV with HDMI in. All Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate (with the exception of A2024 monitor modes). Either using standard VESA modes or using custom output frequencies and size at the user's choice. Even custom screen modes like HighGFX can be used. Workbench resolutions of 1280x1024 pixels are possible without buying a dedicated graphics card. Indivision AGA Mk3 is plugged over the Lisa chip and a second connection over the CIA chip to route keyboard signals to the flicker fixer. You can now make small adjustments to the output picture format including positioning and resizing of the output picture without the need to load the configuration tool. You can simply open the on screen menu using a hot-key combination make adjustments with the keyboard or mouse and then exit this live configuration menu, all this without leaving the game or demo that's currently running. Output screen modes can be saved "per input screen mode", so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you've chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer this allows you to "zap" through pre-sets that are ideal for a specific game or demo. With this you can adjust on the fly different settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3. The Indivision also has automatic monitor recognition, the configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the "first setup" to a matter of minutes, maybe even seconds if you're using one of the pre-sets for popular display panel sizes that we provide.   What's included:
  1. Indivision AGA Mk3 for A1200/A4000T(*)
  2. Adapter board for high-definition digital (HDMI) and VGA output
  3. Adapter board for CIA chip
  4. Connection cables between all boards
  5. Short instructions
In addition, you will require:
  1. Screwdriver to open your computer
  2. A way to transfer the configuration tool (free download from our wiki)
  3. HighGFX software package from Aminet (free download for higher Workbench resolutions)
    (*)This flickerfixer will not fit into an A4000T out-of-the-box. Component CE164C gets in the way of the output cable connector and must be replaced with a lower-profile version prior to installing the flickerfixer. We recommend to do this before you order the product.   Note: ** We don't support or advise the use of the Meanwell PSU or its variants unless its an original Amiga PSU l that has been recapped (better), AT PSU or the CA-PSU. The primary reason is the PSU is the heart of the Amiga and reading the Individual Computers forum, the PSU is the 2nd item to question if there are issues. The number one issue is the socket on the Indivision is not pushed down enough as it does require a lot of pressure. Full explanation regarding the PSU is here   If you have any questions just contact us   Pictures vary, PCB colour is purple.
£183.33 Ex. VAT Select options
ScanPlus ECS Amiga 500 and Amiga 2000 Scandoubler
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector. The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz. ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector. What's included:
  • ScanPlus ECS .
  • VGA breakout socket.
  • Ribbon cable to connect to VGA socket.
  • Item is brand new.

Note:

  • Not retail boxed.
  • Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
£95.83 Ex. VAT Read more
Indivision MK3 AGA for Amiga A1200 and A4000T
Indivision AGA MK3 Flickerfixer for Amiga CD32 and A4000D
Indivision AGA MK3 flickerfixer for Amiga CD32** and A4000D (also available for the Amiga A1200 and A4000T). For installation in an A4000D, a jumper needs to be bent aside (see further down). Sporting both a VGA and HDMI socket (not used at the same time) and a fully digital output which lets you connect to a modern TV or a DVI monitor. Finally, you can connect your favourite computer to a modern flat screen and use super-hires resolutions on your workbench in full colour! Indivision AGA MK3 does everything that it's predecessors did and much more! With the only exception of A2024 monitor modes, all Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate, either using standard VESA modes, or using custom output frequencies and size at the user's choice. Even custom screen modes like HighGFX can be used: Workbench resolutions of 1280x1024 pixels are possible without buying a graphics card. Further, Indivision AGA MK3 supports synchronisation of the output signal with the computer's V-Sync signal, which was not possible with the predecessor models. This allows silky-smooth animations and perfect scrolling without tearing. These fully synchronised modes may not be compatible with all VGA- or DVI monitors (mainly because they are 50Hz for PAL machines), but 50Hz is standard for all TVs with high-definition digital input. Indivision AGA Mk3 is plugged over the Lisa chip. For the first time, a second (optional!) connection is required to take advantage of all features of the product: An additional adapter is clipped on top of a CIA chip to route keyboard signals to the flicker fixer. This gives way for a huge practical improvement over previous versions of the flicker fixer: You can now make small adjustments to the output picture format, including positioning and resizing of the output picture without the need to load the configuration tool. You can now open a simple menu using a hot-key combination, make adjustments with the keyboard or mouse and then exit this live configuration menu - all this without leaving the game or demo that's currently running. Output screen modes can be saved "per input screen mode", so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you've chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer. As opposed to Indivision AGA MK2, more than one output mode can be saved, and instead of making manual adjustments using the live configuration menu described before, you can just "zap" through pre-sets that are ideal for a specific game or demo. This allows you to see the difference of intensity settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3. Another improvement over the predecessor is automatic monitor recognition: The configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the "first setup" to a matter of minutes. Whats included:
  1. Flickerfixer for A4000D(*)/CD32(**)
  2. Adapter board for high-definition digital and VGA output
  3. Adapter board for CIA chip
  4. Connection cables between all boards
  5. Stainless steel back plate for HDMI/VGA output
  6. Short instructions
  7. A transfer method for the configuration tool (free download from individual Computers wiki)
  8. (Optional) HighGFX software package from Aminet (free download for higher Workbench resolutions)
  (*)This flickerfixer will only fit into an A4000D after jumper J214 has been bent aside. This jumper was meant for a future chipset that was never released. (**)For installation in a CD32, live config is only available if three solder-connections have been made, as this model does not have CIA chips. For accurate audio filter reproduction on HDMI TVs, a fourth solder connection must be made. Further, it was reported that select main boards of the CD have the crystal oscillator very close to the Lisa chip, requiring the user to move the part to the side by a fraction of a millimeter. A soldering iron may be required to accomplish this.    
£183.33 Ex. VAT Add to basket