recapping

Showing 13–24 of 26 results

Sega 32X Recapping Service
Sega 32X for Megadrive Recapping Service
Sega 32X for Megadrive recapping service for all board revisions. This service is a maintenance service and not a repair service however recapping can bring back to life your Sega 32X if it shows the following symptoms:
  • No image
  • Intermittent picture
The service includes:
  • Testing of Sega 32X using a Sega Megadrive MK1 (AKA Sega Genesis)
  • Removal of through hole capacitors.
  • Any leakage cleaned up and prepped.
  • Replacement Electrolytic capacitors soldered in place
  • Final testing and video taken of unit working.
This service is only for a recapping service for the Sega 32X add-on only.
£29.16 Ex. VAT Read more
Atari Falcon Recapping
Atari Falcon Recapping Service inc PSU
Atari Falcon recapping service including recapping of  PSU, all board revisions. This service includes both recapping of the Atari Falcons' motherboard and PSU.
  • Check of the Falcon motherboard and PSU before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the  Atari 520 STe / 1040 STE / 4160 STE   What do you need to send? All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.  
£62.49 Ex. VAT Add to basket
Atari Mega STe PSU
Atari Mega STe PSU Recapping Service
Atari Mega STe 1000 PSU recapping service - NOTE this is NOT a repair service.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using quality capacitors.
  • Test output voltages (not under load)
Recapping the Atari STe PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on. All that needs to be sent is the Atari Mega STe PSU itself. [space_40]
£41.66 Ex. VAT Add to basket
Atari STe Recapping Service
Atari 520 STFM / 1040 STFM Recapping Service inc PSU
Atari 520 STFM / 1040 STFM recapping service including recapping of STFM PSU, all board revisions. This service includes both recapping of the Atari STFM motherboard and PSU.
  • Check of the STFM motherboard and PSU before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the  Atari 520 STe / 1040 STE / 4160 STE and Atari 520 STF / Atari 1040 STF   What do you need to send? All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.  
£66.66 Ex. VAT Read more
Atari STe Recapping Service
Atari 520 STF / 1040 STF Recapping Service inc PSU
Atari 520 STF / 1040 STF recapping service including recapping of STF PSU, all board revisions. This service includes both recapping of the Atari STF motherboard and PSU.
  • Check of the STF motherboard and PSU before recapping is begun.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Retest (Video, Audio, Floppy Boot) using diagnostic cartridge.
We also provide a recapping service for the  Atari 520 STe / 1040 STE / 4160 STE   What do you need to send? All we need is the mainboard and PSU, so please only send the board and PSU in its metal shielding. If however you choose to send the whole unit, there is an option to do that also via the choices below.  
£49.99 Ex. VAT Select options
Amiga A4000 PSU Recapping Service
Amiga A4000 PSU Recapping Service
Amiga A4000 PSU recapping service - NOTE this is NOT a repair service.
  • Removal of existing capacitors.
  • Cleanup and preparation of area.
  • Replace using Panasonic/Wurth/KEMET capacitors.
  • Test output voltages (not under load)
Recapping the Amiga A4000 PSU is a good preventive measure, the reason being these capacitors are under alot of stress (which they are designed to take of course) however with age they start getting tired which could lead to issues later on. All that needs to be sent is the Amiga 4000 PSU itself.
£29.16 Ex. VAT Add to basket
PC Engine DUO Recapping Servic
PC Engine DUO Recapping Service (Standard)
PC Engine Duo (NEC) recapping service recapping service (Standard), all board revisions, all electrolytic capacitors are replaced. The NEC PC Engine DUO mainboard is recapped using high quality capacitors. NOTE this is NOT a repair service, the PC Engine DUO needs to be in working order, this is preventative maintenance. What's included:
  • Test before hand
  • Disassemble unit.
  • Removal of existing capacitors.
  • Clean-up and preparation of the capacitor areas.
  • Replace all surface mount capacitors.
  • Replace through hole electrolytic capacitors.
  • Test out of the shell.
  • Reassemble and final testing.
For this service the whole unit will need to be sent inc controller (not PSU).
£58.33 Ex. VAT Read more
Macintosh Colour Classic Logic Board
Macintosh Colour Classic Recapping Service (Premium)
Macintosh Colour Classic recapping service (Premium), all board revisions, all electrolytic capacitors are replaced. The Macintosh Colour Classic logic board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh Colour Classic needs to be in working order.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace all surface mount capacitors using Polymer capacitors.
  • Replace 2 x Axial capacitors using high quality standard electrolytic capacitors (these are not available in axial form).
 
£40.83 Ex. VAT Add to basket
SNES Modding Service Region Free 50/60hz
SNES Region Free, Switchless, DeJitter 50/60hz Modding Service
SNES region free, switchless, deJitter DFO modding service. Free your Super Nintendo or Super Famicom from being locked to one region with this modification. Play any region Super Nintendo or Super Famicom PAL or NTSC and play it how it was meant to be played. What does the modification do?
  • Works with all revisions of SNES or Super Famicom games console.
  • SuperCIC: Lockout chip replacement 50Hz/60Hz switch capability.
  • uIGR - Use the controller to perform resets or 60Hz and 50Hz switching.
  • Region Patch: Overrides region protection based on picture processing status reads.
  • DeJitter: Removes jitter on sync for NTSC mode.
  • DFO: Dual Frequency Oscillator, used to switch between base clocks for 50Hz, 60Hz video-modes.
  • Premium ENIG (gold immersion) finish.
  Full Details: SuperCIC By holding down the reset button on the console this will switch between 50Hz (green LED), 60Hz (red LED) or Auto-Region (yellow LED). If you have a SD2SNES you are able to pair the SuperCIC with the flash card. With this you are able to switch between 60Hz and 50Hz mode. However, you need to have the uIGR, which is master for the region setting, in SuperCIC pass through mode. uIGR The uIGR looks at the controller inputs directly and is then able to detect certain button combinations. All button combinations are highlighted below: Region forcing:
  • 60Hz: L + R + Select + A
  • 50Hz: L + R + Select + Y
  • Auto: L + R + Select + B
  • S-CIC pass through: L + R + Select + D-pad left OR L + R + Select + D-pad right
Reset:
  • Simple reset: L + R + Select + Start
  • Double reset (back to main menu of sd2snes): L + R + Select + X
  Region Patch Overwrites region if game request register $213F, where bit 4 represents the region. You also have to consider switching off the region patch if using non-original cartridges or flash cards (sd2snes with Pairmode with SuperCIC is not a problem). DeJitter While in NTSC mode the SNES outputs a shorter scanline in non-visible area. This might be an issue for certain TVs if you use pure analog to digital conversion without frame buffer like the OSSC does. DeJitter ‘removes’ this shorter line by pausing the clock for a few cycles. As drawback this mechanic varies output timing a bit, however the inaccuracy is neglectable when comparing it to clock variations throughout different consoles. At the moment, DeJitter is enabled by default and can only be disabled by setting jumper SJ31. DFO Short for Dual Frequency Oscillator. Actually in combination with the CPLD this allows to switch between three output clocks plus two colour carrier clocks.   The service includes:
  • Testing of the SNES or Super  Famicom beforehand
  • Full strip down of the console
  • Full Installation of the SNES MultiRegion with DeJitter QID modification
  • Testing using PAL and JAP (NTSC) gaming cartridges
  • Final testing and video taken of unit working and switching.
We can also offer a full recapping service and regulator upgrade.    
£79.16 Ex. VAT Read more
Sega Triple Bypass for Mega drive or Genesis
Sega Triple Bypass installation service for Mega Drive / Genesis
Sega Triple Bypass Installation service for Sega Mega Drive & Genesis MK1 or Mk2. Now you can have the best RGB video and audio from your Sega Mega Drive or Sega Genesis, this installation service includes a full refurbishment of your console and includes recapping.
The service includes:
  • Testing of Sega Mega Drive/Genesis beforehand
  • Full recapping of the mainboard
  • Installation of the Sega Triple Bypass Modification for RGB
  • Complete Audio modification to go through Triple Bypass - Aidio will now comeout of the mini DIN.
  • Add fixes to reduce jailbars and 'RAM' noise (add pullup resistors and 2 capacitors)
  • Final testing and video taken of unit working.
  • Includes new Mini DIN to RGB Scart Lead
  Overall, this is the best video and audio you will see on the beloved Sega Mega Drive/Genesis.  
What is the Triple Bypass Modification?
  • The modification uses the latest THS7374 amp and uses bypass circuitry to improve RGB signal clarity.
  • A Mega Amp 2.0 audio amp is used which improves the audio compared to a stock Megadrive / Genesis.
  • Jumpers are applied which allow you to choose between many audio configurations.
  • Audio optimised with the MDFourier project to match the best audio quality that comes from a new Model 1.
  • Low-pass filter toggle.
  • The modfication is professionally assembled using high-quality components from JP & USA. Brands such as Nichicon, Vishay, Panasonic.
  • Premium ENIG (gold immersion) finish.
  This is not a repair service, this is for working units only.
£120.83 Ex. VAT Read more
Macintosh Performa 450 Recapping Service
Macintosh Performa 450 Apple Recapping Service (Premium)
Macintosh Performa 450 Recapping Service (Premium), all board revisions, all electrolytic capacitors are replaced. The Macintosh Colour Classic logic board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh Performa needs to be in working order.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace all surface mount capacitors using polymer (non leaking) capacitors.
£37.49 Ex. VAT Add to basket
Macintosh Colour Classic Logic Board
Macintosh Colour Classic Recapping Service (Standard)
Macintosh Colour Classic recapping service (Standard), all board revisions, all electrolytic capacitors are replaced. The Macintosh Colour Classic logic board is recapped using high quality capacitors. NOTE this is NOT a repair service, the Macintosh Colour Classic needs to be in working order.
  • Removal of existing capacitors.
  • Clean-up and preparation of area.
  • Replace all surface mount capacitors.
   
£27.49 Ex. VAT Add to basket