Amiga ATX Adaptor - Big Box Amiga
Amiga ATX PSU Adaptor – A1000, A2000, A3000
PRODUCT DISCONTINUED   Amiga ATX PSU Adaptor which can be used in an ATX tower case or inside an A1000, A1500, A2000, A3000 (Big Box) Amiga, this adapter provides the -5V and ‘Tick’ signal. For the A3000, the FAIL signal is available to use. This is the highest rated power adapter available, it can safely handle the following power levels: +5V @ 15A +12V @ 8A This yields a system power of 175W. One DIP switch sets the power switch type, momentary (as used on ATX cases) or latching (as used on original power cases.  The other DIP switch sets the ‘Tick’ frequency. PCB dimensions, 68x41mm Does not include any ATX PSU. Designed and built by Ian Stedman    
Read more
BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000/A3000 Accelerator (No CPU)
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and provides a CPU socket that supports:
  • 68040 running at 25Mhz (our cards are set up for 68060 CPUs ONLY)
  • 68060 running at 50/75/100MHz (CPU heatsink and fan high recommended with a REV 6 CPU) LC/EC variants 50Mhz is suggested.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Overclocking capability up to 100 MHz with full 68060 Rev. 6 CPUs ONLY with heatsink and fan (we don't offer support for overclocking or damage).
  • Onboard 5V header to connect the optional CPU fan.
  *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. Installation guide here [hr]   For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.   *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. [space_40]
£333.33 Ex. VAT Select options
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2.1 ROM Burning Service for Amiga A3000
AmigaOS 3.2.1 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.2 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.
What you will receive:
  • Physical AmigaOS 3.2.1 Kickstart HI ROM
  • Physical AmigaOS 3.2.1 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.  
£12.49 Ex. VAT Select options
BFG9060 Accelerator Amiga A4000 A3000
BFG9060 Amiga A4000 Accelerator Full 060 FPU
BFG9060 is a new accelerator for the Amiga A4000, A3000, A3000T* and A4000T developed by Matthias Heinrichs. The card slots into the existing CPU slot on the Amiga motherboard and includes a full 68060 CPU running at 50Mhz with FPU and MMU.
  • 68060 running at 50 Mhz.
  • 128 MB of DMA Fast RAM.
  • Temperature and voltage monitoring via I²C.
  • Onboard 5V header to connect the optional CPU fan.
  *A3000T is very picky and has not been tested, so if being used with an A3000T the card is sold as seen. Installation guide here [hr]   For every BFG9060 sold we donate a percentage of the sale to Matthias Heinrichs to support further developments and we also support our builders.   [space_40]
£708.33 Ex. VAT Add to basket
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.2 ROM Burning Service for Amiga A3000
AmigaOS 3.2 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.2 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.
What you will receive:
  • Physical AmigaOS 3.2 Kickstart HI ROM
  • Physical AmigaOS 3.2 Kickstart LO ROM
The Process:
This service requires proof of your purchase of AmigaOS 3.2 a screenshot of a receipt will be fine. Please note ONLY customers who already bought AmigaOS 3.2 can purchase this service. If the buyer is unable to provide proof of the purchase the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation using the upload tool below.
We are proud to be an official Hyperion reseller.  
£10.83 Ex. VAT Select options
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 for Amiga A3000 Official Licenced Bundle
PRODUCT DISCONTINUED AmigaOS 3.1.4 for Amiga A3000, this product includes:
  • 2 x Physical 3.1.4 Kickstart ROMs (HI & LO) to be installed in your real Amiga.
  • Unique AmigaOS 3.1.4 serial number (to enable you to download the official AmigaOS digital files which includes AmigaOS ADF files Workbench, Install, Storage, Fonts, Extras, Locale) and the digital 3.1.4 ROM file from the Hyperion website)
  • Official AmigaOS 3.1.4 Disk Labels (6 in total)
  • Manual
We can also offer a preloaded CF Card of your choice with or without CF IDE adaptor/Ribbon as an option below.
No 3.5" floppy disks?
No problem, getting 6 x 3.5" floppy disks that work are in short supply, however we can offer a solution, we have a selection of Gotek drives which replaces your internal 3.5" floppy drive which will enable you to use the AmigaOS ADF files easily just by putting them on a USB stick (available as an option) , Gotek drives are available here Want to know what a Gotek Drive is? Check out our guide here

What is AmigaOS 3.1.4?

The new, cleaned-up, polished Amiga operating system for your 68K machine fixes all the small annoyances that have piled up over the years. Originally intended as a bug-fix release, it also modernizes many system components previously upgraded in OS 3.9.
Contrary to its modest revision number, AmigaOS 3.1.4 is arguably as large an upgrade as OS 3.9 was, and surpasses it in stability and robustness. Over 320K of release notes cover almost every aspect of your favourite classic AmigaOS -- from bootmenu to datatypes.
Some key features:
  • Over 20 Kickstart ROM modules and many more disk-based core OS components were fixed, updated, or added.
  • Native support for all Motorola 68000-68060 CPUs, and a more robust Auto-Configuration process.
  • Support for large hard disks, including boot, for any OS 2.x/3.x-compliant controller driver supporting HD_SCSI_CMD, TD_64 and/or NSD. Dedicated boot partitions are a thing of the past, even on legacy devices. You can also use variably-sized "super floppies".
  • modernized Workbench as powerful as the OS 3.9 version, including new or refreshed Preference editors in the legacy OS 3.1-"GadTools" style. Its tools such as DiskCopy and Format fully support large media. Printer, hard disk and many other support tools have been fixed and upgraded.
  • Remember "Diskdoctor"? It earned its PhD and is now ready to reliably rescue data from your floppies or hard disks.
  • The CLI/Shell and many of its commands have been reworked and modernized, now sporting native support for pipes, softlinks, hardlinks and long filenames. New commands support running Workbench programs from the Shell or upgrading ROM modules.
  • CrossDOS and the CD-ROM filesystem are now smarter, faster, and multi-threaded, adding Rockridge and Joliet extensions as well as UDF.
  • Fully reworked, modernized and bug-fixed printer drivers include support for PCL and PostScript, along with legacy NEC and Epson printers.
  • An optional upgradeable intuition.library provides off-screen dragging of windows for native and P96 RTG screens.
  • colorful, professionally designed icon set is included, along with the traditional four-color icons.
We are proud to be an official Hyperion reseller.  
£0.00 Ex. VAT Read more
Refurbished Amiga A3000 Computer
Amiga A3000 Refurbished with Keyboard and Mouse
Amiga A3000 refurbished with original keyboard and mouse (pregnant version) This is an early model with Super-Kickstart. In working order and has been recapped and tested: Specs:
  • 68030 16Mhz Processor
  • 68882 FPU 16Mhz
  • 2Mb Chip Ram
  • 4Mb Fast Ram
  • Super-kickstart 1.4
  • US PSU (will include step down transformer)
  • Original Super Kickstart Floppy disk
  • Includes Workbench 1.3 and 2.04 disks
Due to the fragile nature, shipping is possible for the base unit, keyboard and mouse. However in person delivery is possible and happy to meet halfway within the UK for a charge If within the South East of the UK we can deliver to your door or collect from us (Birchington, Kent) Overseas shipping is also possible.   Please contact us if you have any questions,   Battery are has been cleaned up, photo taken before clean up.   Photo will be updated soon. MONITOR NOT INCLUDED.  
£2,999.99 Ex. VAT Read more
AmigaOS 3.1.4 / 3.2 Amiga A1200 / A3000 / A4000
AmigaOS 3.1.4 ROM Burning Service for Amiga A3000
PRODUCT DISCONTINUED AmigaOS 3.1.4 ROM Burning Service for Amiga A3000, within this service we will burn the AmigaOS 3.1.4 Kickstart ROM files to 2 x physical kickstart ROMs both HI and LO which can be installed in your real Amiga 3000.
What you will receive:
  • Physical AmigaOS 3.1.4 Kickstart HI ROM
  • Physical AmigaOS 3.1.4 Kickstart LO ROM
NOTE NO License is included for AmigaOS 3.1.4 or 6x floppy ADF files are included, this is purley a burning service, However we are able to supply AmigaOS 3.1.4 inc Kickstart ROM and AmigaOS ADF disks here
The Process:
This service requires proof of your purchase of the digital version of AmigaOS 3.1.4 (for example screenshot of your purchase from the Hyperion website). Please note ONLY customers who already bought digital version of AmigaOS 3.1.4 can purchase this service. If the buyer is unable to provide proof of the purchase from the Hyperion website the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).
Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation of the order from the Hyperion website or a screenshot of the confirmation email using the upload tool below. If your purchasing more than one set of ROMS, you will need a licence per ROM set.
We are proud to be an official Hyperion reseller.  
£0.00 Ex. VAT Read more