Commodore Amiga

Amiga 500 Case Badge - PiStorm Boing
Amiga 500 Case Badge – PiStorm Boing Ball
Amiga 500 Case Badge - PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!
£4.16 Ex. VAT Add to basket
Buddha Plus One IDE Controller
Buddha Plus One IDE Controller Commodore Amiga
Buddha Plus One IDE Controller for Commodore Amiga with zorro slots (2023 version) is a IDE controller for Amiga computers with Zorro slots (Amiga A2000, A3000, A4000 CheckMate 1500 Plus with Zorro interface) and provides you connectivity for hard drives,CD-Rom Drives, DVD Drives (both readers and writers), and of course CF cards and SSD with PATA interfaces.. Buddha Plus One features:
  • Two IDE ports
  • One CF card slot
  • 1Mb of Fast Ram
  • GUI-based settings tool
  • Elaborate LED concept
  • High Speed
  • Multiple measures to prevent wrong installations
The two IDE ports and the CF card slot are non-conflicting. This means that you can use up to five mass-storage devices at the same time, and if that's not enough, you can add more Buddha controllers to the same computer! Added memory While the combination of a mass-storage controller and memory on the same card is not a new invention, the 1MByte of true 0-wait state fast memory of the Buddha Plus One controller does not conflict with existing memory cards. If you are expanding a system that has already maxed out it's 8MByte of Z2 space (no matter if it's fastmem, a PC bridge card or RTG graphics), Buddha Plus One will still add 1MByte of memory, without using any of the precious Z2 expansion space. A2000 users can choose to map the memory to one out of two addresses: The legacy "trapdoor memory" address $c0.0000, where it adds compatibility with old software titles (especially for machines that have been expanded to 1MByte or 2MBytes of chip ram), or to the normally-unused address space at $a0.0000. A3000 and A4000 users can only use address $a0.0000. Memory is not available if installed in a Zorro expansion of an A1200. Robust against installation errors Buddha Plus One has a long heritage and we've learned from numerous support cases of the past decades that in the heat of the moment, you may accidentally plug in the card the wrong way round. For the first time in Amiga history, we're presenting mechanical and electrical measures to either prevent wrong installation, or to keep the controller safe from harm if you manage to plug in the card the wrong way round. Just flip the card around and it'll work as if nothing bad ever happened. Easy configuration While previous versions of the Buddha controller could only be controlled with command line tools, Buddha Plus One introduces a GUI that is provided in the ROM of the controller, so no software installation and/or download is required. This GUI will even work with Kickstart V1.3! Elaborate LED concept

The original Amiga computers only have a single HD LED. Buddha Plus One will unite all access-LEDs (including onboard IDE/SCSI accesses) into a single one without soldering or complicated configuration steps. Two LED cables are included with Buddha Plus One, making LED wiring easy without soldering, and without the need to drill holes for additional LEDs into precious original cases. The LED output will automatically sense how many LEDs there are in a row (one in case of A2000/A4000 or two in case of the A3000), and the LED input of Buddha Plus One will accept any polarity.

Quick boot support

The Amiga can start blazingly fast. Amiga users are so used to having a usable desktop within seconds after switching on that every single additional second is already a reason to be worried. Buddha Plus One gives the user various options to skip unnecessary wait times: The maximum time that Buddha will wait for a drive to spin up can be set in the graphical startup menu. Unused ports can be switched off, and if you have an onboard IDE/SCSI controller that you're not using any more, it can also be switched off in the Buddha Plus One configuration, saving several ten seconds of boot time.

Improved speed

Let's face it: Buddha has never been a speed demon. The Z2 bus with it's 7MHz and 16 bits has it's limits, and that's in the neighbourhood of 2.3MBytes/second, measured with a medium-speed 68020 or 68030 CPU. However, there's two special cases where Buddha Plus One adds significant transfer speed: First, an un-accelerated A2000 would struggle to reach 800KBytes/s with a 7MHz 68000 CPU on previous versions of the Buddha controller. Buddha Plus One now adds hardware acceleration that improves transfer rates with 68000 CPUs by about 35%. Buddha Plus One with a 7MHz CPU beats the "magical" 1MByte/second barrier by a large margin. The second special configuration where Buddha Plus One can add speed is in the Z4 board for an A1200 computer. Z4 boards are also known as "Elbox Z4" or "Winner Z4" Boards, and they sport a "Fast-Z2" mode that can add up to 50% to measurable transfer speed. We recommend to only activate this mode if only CF cards or DOMs are used. Stability with long IDE cables may not be given.

Extended software installation

Buddha Plus One comes with a DOM (disk-on-module) pre-installed. This DOM contains our automatic partition/install tool and licensed copies of Amiga OS 1.3, 2.1 and 3.1. Partitioning and installing a CF card or hard drive has never been easier! Even if you have lost your OS installation floppies or your floppy drive is defective, you can bring your Amiga to life within minutes. If a CD ROM drive is found, drivers and file system are also automatically installed, letting you install more software or Amiga OS V3.2 from CD (Amiga OS3.2 is available separately in this shop). If there is any version of the X-Surf networking card in your computer, you can continue to install a TCP/IP stack and network GUI. This will break the vicious circle of having to transfer software to the Amiga in order to install a transfer method for software.

What's included:

  • Buddha Plus One
  • LED extension 24cm
  • LED connection cable 24cm
  • Instruction manual (English/German)
   
£83.33 Ex. VAT Read more
Amiga 500 Case Badge - PiStorm Commodore
Amiga 500 Case Badge – PiStorm Commodore
Amiga 500 Case Badge - PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!
£4.16 Ex. VAT Read more
Amiga 1200 – Holographic Boing Ball Case Badge
Amiga 1200 – Holographic Boing Ball Case Badge
Amiga 1200 – Holographic Boing Ball brand new, perfect replacement for any A1200 case or for the new A1200 cases. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 1200 case!    
£4.16 Ex. VAT Add to basket
Commodore Amiga PSU Duo Plus
Commodore Amiga PSU for 2 x A500/600/1200 (DUO PLUS)
Commodore Amiga PSU DUO EDITION PLUS for 2 x A500/A600/A1200 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel forregular and accelerated Commodore Amiga A500, A500+, A600 and A1200. The new Amiga PSU DUO Edition is a modern, 65W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Key features:
  • Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
  • Stabilized +12VDC up to 1.0A rated output (per channel)
  • Stabilized -12VDC up to 0.15A rated output (per channel)
  • Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
  • Double over current protection for all output lines
  • Main AC power On/Off switch
  • Two channel On/Off switches
  • Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
  • Eco friendly, green design: consumes ~20% less power compared to original PSU set
  • Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
  • Detachable AC cable (allowing you to use your own desired cable length).
  • Weight only 0.3 KG
  • Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
  • UK Stock
 
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).  
£124.99 Ex. VAT Add to basket
Amiga CD32 Black Edition Reproduction Box
Amiga CD32 Black Edition Reproduction Box
PRODUCT DISCONTINUED Amiga CD32 reproduction box Black Edition, these are brand new and designed to be used as box art or to house your Amiga CD32. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga CD32 was shipped.
Key features:
  • Box is true to the original size and design.
  • Including "Innards" for positioning the Amiga CD32 console and accessories.
  • Laminated outside / moisture repellent.
  • Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32   Please note: This is a reproduction box and NOT AN ORIGINAL.
£0.00 Ex. VAT Read more
Amiga A600 Keyboard Membrane
Amiga A600 Keyboard Membrane (New) BLUE
Amiga A600 Keyboard Membrane brand new BLUE. If you have issues with your Amiga A600 keyboard with missing keys or missing rows of keys the chances are the membrane needs replacing. There are 3 types of Mitsumi keyboard membrane for the Amiga A600: This membrane is compatible ONLY with the BLUE A600 membranes, if your current A600 membrane is GREEN these are different and are available to purchase here What if you have missing keys or rows of keys on the Keyboard? Try these possible fixes first:
  • Check the ribbon is inserted all the way in the connector on the Amiga A600 mainboard.
  • If it's only 1 or two keys the plunger may need a clean, strip down the keyboard and clean the plunger with some IPA.
  • If it's a whole row of keys missing its a very strong possibility that the membrane on your needs replacing.
  • The final step is to trim off 1mm of the connector (the ribbon end that plugs into the A600 mainboard).
Do let us know if any of the above fixes help you!    
£24.99 Ex. VAT Read more
Refurbished Amiga A500
Refurbished Commodore Amiga 500 PLUS

Commodore Amiga 500 PLUS – Professionally refurbished

Technical Specifications
  • Motorola 68000 (7.14Mhz) CPU
  • 1Mb Chip Ram
  • 2.04 Kickstart Rom
  • 3.5" Floppy Drive
  • UK Layout Keyboard
What’s included?
  • Professionally refurbished Amiga 500 + (PLUS) Unit (excluding mouse and PSU), these are options that can be added at the end.
  What is Refurbished? Each Commodore Amiga 500 + (PLUS) mainboard is professionally recapped and deep cleaned using a Ultrasonic cleaner, bathed using deionised water and professional grade PCB/Flux cleaning solution. Once completed it is dried and a full diagnostic test is completed. Each unit is thoroughly inspected make sure the Amiga 500 + (PLUS) worked as it did when it first came from the factory back in the 1980’s. Case and keyboard is stripped and cleaned but due to age may show signs of use and age.   What is Ultrasonic cleaning? Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid, this fluid is made up for this specific job which is to clean and remove any flux left over from recapping. We use deionised water (deionized depending where your from) and professional grade PCB cleaner. An example of the results: [caption id="attachment_17767" align="aligncenter" width="300"] Amiga Motherboard Before being Recapped & Ultrasonic Cleaned[/caption]   [caption id="attachment_17766" align="aligncenter" width="300"] Refurbished Amiga Motherboard - Recapped & Ultrasonic Cleaned[/caption] Want up add some extras? We want you to have the Amiga you always wanted, and that's why we can offer some great upgrades to your Amiga, for example: Extra fast ram for WHDLoad, Gotek drives etc. if there is something else or would like to add any mods let us know!   Shipping UK shipping will be via Parcelforce and shipping cost will be calculated the checkout. Worldwide shipping available simply contact us for a shipping quote.   Images of the Amiga 500 + (PLUS) is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 + (PLUS) we have please contact us.  
£399.99 Ex. VAT Select options
ScanPlus ECS Amiga 500 and Amiga 2000 Scandoubler
ScanPlus ECS – Amiga 500, 500 Plus and Amiga 2000 Scandoubler
ScanPlus ECS is a internal Scandoubler for the Amiga 500, 500 Plus and Amiga 2000 (not Amiga 3000). The advantage of the internal ScanPlus ECS is that it will allow you to connect to a standard VGA monitor weather that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector. The primary PCB sits where the Denise sits, and the Denise chip sits in the ScanPlus ECS PCB (8362 (OCS) and 8373 (ECS) Denise are supported selectable with a jumper). Output connector connects to a VGA at 50hz. ScanPlus ECS is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are avilable via the VGA connector. What's included:
  • ScanPlus ECS .
  • VGA breakout socket.
  • Ribbon cable to connect to VGA socket.
  • Item is brand new.

Note:

  • Not retail boxed.
  • Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.
 Read more
Arashi Grey Asahi A1200 Amiga Case
Asahi Amiga A1200 Case Arashi Grey
Asahi Amiga A1200 Case Arashi Grey manufactured by A1200.net What's included?
  • Top case including enhancements
  • Bottom case including enhancements
  • Enhanced bottom trapdoor with extra vents.
  • Enhanced rear trapdoor + extra plastic holder DVI / VGA shaped hole.
  • Rubber feet
  • Set of screws
How are these brand new?
In 2016 840 Amiga users made it possible in supporting a Kickstarter to reproduce the Amiga 1200 case, the new cases are made using Injection Molding manufacturing technique to produce top and bottom shells as well as trapdoors and parts. The process implies the use of 3 new moulds, the first one is for the top shell, second mould for the bottom shell and last one for trapdoors and parts, all produced using brand new moulds.  
What is the Asahi Series of A1200 cases?
The Asahi series of A1200 cases are limited edition, once gone, they are gone. The word 'Asahi' is a Japanese word that means "morning" and "sunlight". It is derived from the Japanese words asa meaning "morning" and hi meaning "sunlight". The name symbolizes the start of a new day, and is associated with hope and new beginnings. The limited edition series are available in the following colours: Akuma Red - The word ‘Akuma’ in Japanese means ‘Devil’. With Devil Red we reference the Red Demon. A historic figure and one of the four Guardians of the Tokugawa in Japanese history. This color Red is a very dark Wine Red but brightens up to a blood red when light emits through it. Arashi Grey - The word ‘Arashi’ in Japanese means ‘Storm’. The case is a very dark grey, but when light emits through it turns into a brighter grey with clear blue accents.
Haruku Green - The word ‘Haruku’ is the Japanese word for ‘Hulk’. This is an ode to the big hulks of oaks you find in Japan. The case is a very dark green, but when light emits through it turns into a brighter richer green.
Shinkai Blue -The word ’Shinkai’ in Japanese means ‘Deep Sea/Ocean’ The case is a rich blue translucent which was close to the Commodore Blue but allow the right light and viewing angle to give it a dark purple hue. The blue brightens up when light emits through it.
 
Enhancements galore:
The Amiga community has never died and some have produced some great add-ons over the years to make sure the Amiga is still relevant and useful today as it was back in the 80's/early 90s and these cases take full advantage of that weather that's simply transferring your existing motherboard from your existing Amiga 1200 or have a luxury of installing a MiST FPGA Board. Below are few more enhancements: [accordion] [pane title="External CF Adaptor" start=open] A CF slot can be opened up on the side of the A1200 case to allow easy access to what would be the CF card within the A1200 itself. [/pane] [pane title="MiST FPGA Board"] MiST is a FPGA based modern board that implements classic 16bit computers like the Commodore Amiga, Atari ST and 8bit systems like the Commodore 64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, SNES as well as Arcade machines. The primary difference between the MiST is that its NOT emulation. The Amiga A1200 purple case has mounts to mount the MiST FPGA. [/pane] [pane title="Raspberry PI"] Yes you can mount a Raspberry PI 2/3 within the new A1200 case with the use of the mounts already part of the case for a nice clean solution. [/pane] [pane title="Keyrah V3"] [caption id="attachment_18644" align="aligncenter" width="300"]Keyrah V2 Keyrah V3 for the Amiga 1200/600, C64, VIC 20 and C16[/caption] Keyrah V3 is an IO adaptor that allows you to use the original keyboards of the Commodore Amiga 600 and 1200, Commodore 64, VIC-20 and C-16 within their respective cases. The purpose of this you can then install a Raspberry PI which uses the original keyboard of that computer and providing 2 x D9 ports. The new Amiga 1200 case has mounts are located at middle top of bottom shell. This location make the keyboard adapter available for Raspberry Pi or MiST board. Original Amiga 1200 keyboard ribbon will fit nicely just at the right place on the keyboard adapter board. I/O connectors are accessible through rear panel I/O slots. [/pane] [/accordion]   So what are the differences with the original Commodore case?
  • All screws are secured with metal brass inserts. No more broken plastic clips.
  • The bottom trapdoor has extra vents for a better case air flow.
  • 2 new rear trapdoors are available to accommodate VGA and DVI. The third one is a Plain door.
  • The case supports the following modern devices : Raspberry Pi©, MiST© FPGA, Keyrah© V3 keyboard adapter, RapidRoad© Double USB and Lotharek© HxC Floppy emulator, Flashfloppy
  *Keycaps NOT included but available as an option.    
£99.99 Ex. VAT Select options
Sale! Heretic II for AmigaOS 4
Heretic II Amiga Game (Heretic 2) AmigaOS 4.1
Heretic II Amiga game for AmigaOS 4 is the highly acclaimed conceptual sequel to the Hexen and Heretic series by Raven Software ®. Heretic II relies on a tweaked version of the Quake IITM engine by Id Software ® and plays from a behind-the-back third-person perspective as in the Tomb Raider series but still controls a lot like a first-person shooter. In Heretic II you play Corvus, the Elf who was exiled to the Outer Worlds but managed to find his way back home. Unfortunately, home is not the place it used to be: the land is beset by a dark magical plague and Corvus' brethren have mutated beyond recognition and have become insane with bloodlust. Enter Corvus, our hero. Raven Software have invested enormous effort in the animation of Corvus who has to run, jump, swim, climb and creep his way through myriad locations, solving puzzles and invoking magic while fighting off cursed inhabitants. Corvus is however at his best when he has to fight and quite an arsenal he has got too. His main weapon is his sword-staff which he uses in a variety of ways (including pole-vaulting). Then there's his magical arsenal: a dazzling array of magic spells including fire- and lightning-based attacks that light up the screen with stunning pyrotechnics. On top of that he has his Hellstaff which fires energy blasts at a furious rate, the Storm Bow, whose magical red arrows create deadly thunder showers and the Phoenix Bow with its exploding ammunition. One of the main attractions of Heretic II is the use it makes of Id's Quake II ® engine. The game is set in a huge, immersive gameworld characterised by meticulously detailed and realistically rendered architecture. Level design too is flawless with levels large, cohesive and intuitively structured with the occasional breath-taking in-game cutscene thrown in for good measure. Other game features include multiplayer action, a drop camera, stationary look-abouts with MouseView and formidable enemy AI. Conclusion: Heretic II is one game you just can't afford to miss. Features
  • Features Quake IITM 3D engine by Id Software ® using OpenGL
  • MiniGL(Warp3D), GL4ES (Warp3DNova) and Software Renderer
  • Both GL Renderers with Multitexturing
  • CD Audio with Game Music (also playable through ISO-mounting, CD does not need to be in Drive while playing)
  • Localization (both Text and Audio-Output) to English, German, French, Italian and Spanish
  • Improved Quality of Video Intro/Extro
  • High Resolutions (1920x1080 and 4K Resolutions) added
  • Multiplayer Support (internet or LAN up to 32 players)
  • Formidable Enemy AI
  • Outstanding player controls (mouse, keyboard, joystick) using Amiga Input
  • Expandable with new mission packs like Quake
Technical Requirements
  • AmigaOS ® 4.1 or higher
  • PPC (x1000/x5000, Sam, QEmu or older PPC Hardware like Peg2/Classic/A1, no support for A1222 currently)
  • 64 MB minimum, more recommended
  • 3D acceleration supported through Warp3D/Warp3DNova (OpenGL)
  • Soundcards supported through AHI
  • 4x CD ROM (only needed for game installation)
  • 400 MB free hard drive space
   
Original price was: £44.16.Current price is: £33.33. Ex. VAT Add to basket
A630 Rev 3 Amiga 600 Accelerator
A630 Rev 3 128Mb Accelerator 68030 50Mhz / FPU Amiga A600
A630 Rev 3 128Mb Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU and has 128Mb Fast ram. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit. Full specs:
  • CPU MC68030, clocked on 50MHz.
  • FPU 68882FN40 - synchronous or asynchronous clocking
  • 128MB SDRAM Fast Ram.
  • Cooling: Passive or Active. No heatsink or fan is included, options are below.
  • PCMCIA Friendly.
 
Important Information:
 
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2   Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.  
Notes:
  • Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
  • The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be  purchased below.
  • The Oscillator will need some insulation tape put on top to stop the A630 touching it.
  • PCB Colour will vary.
  *2Mb Chip ram is strongly recommended for WHDLoad which is available here   {PCB Colour will vary)    
£216.66 Ex. VAT Read more