Commodore Amiga
Showing 169–180 of 196 resultsSorted by popularity

Elbox Mediator PCI 1200 TX+ BLACK
Elbox Mediator PCI 1200 TX+ busboard is designed to enable the expansion of towered Amiga 1200 with a wide range of high-performance, low-cost PCI cards.
New firmware embedded in CPLDs of MEDIATOR 1200 TX allows significant speed-up of graphic card operations when hardware 2D and 3D acceleration is used in single-processor systems (68k or PPC).
Features:
- 6 PCI slots (PCI 2.2 compatible)
- Power Management Interface
- 66/33MHz PCI clock (transfer rate up to 264MB/s)
- 32-bit PCI datapath
- 4GB PCI memory space
- Busmastering/DMA in all PCI slots
- SDRAM/SGRAM of PCI gfx card as a fast DMA buffer
- Interrupt controller (4 lines to each PCI card)
- AT and ATX PSU connectors
- Compatibility with 68030/040/060 and PPC turbo cards
- Fits in any A1200 in D-BOX, E/BOX (Power, Winner), EZ-Z4 and Infinitiv tower
Software:
- 2D graphic drivers for: Radeon 9200, Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee,
- S3 Virge and S3 Virge DX PCI graphic cards
- Warp 3D drivers working with Voodoo5, Voodoo4 and Voodoo3 graphic cards
- TV tuner drivers for: most of available PCI TV tuners (over 100 models supported)
- AHI sound drivers for: Sound Blaster 4.1 Digital, Sound Blaster 128 and
- ForteMedia FM801-based sound cards (e.g. Terratec 512i Digital)
- USB drivers for the Poseidon stack for: Spider and Spider II USB 2.0 cards
- Network Sana-2 drivers for: Fast Ethernet 100Mbps PCI cards
- Network Sana-2 drivers for: Ethernet 10Mbps PCI cards
Current info about supported PCI cards is available in the Mediator Driver Guide.
Package contents:
- Mediator PCI 1200 TX black busboard
- Mediator Multimedia CD
- User's Manual
We can also supply the Elbox BlackBOX 1200 Tower case

A1200 FPU Upgrade (Onboard)
A1200 FPU upgrade (onboard) which includes socket, FPU and installation.
What does the modification do?
This FPU modification adds a real FPU to the A1200 motherboard, there has always been a place (U0) for an onboard FPU but it was never added. This is a perfect compliment for a stock A1200 or one with an accelerator without an FPU option, for example The TF1230 or any standard ram upgrade like the 11Mb Fast Ram upgrade. However there are a couple of limitations of adding an onboard FPU.- The FPU will be using the CPU clock which is at 14Mhz, which means the FPU will be running at 14Mhz
- The FPU will be disabled if you use a 040 or 060 accelerator, for example TF1260. This is because both the 040 and 060 processors do not acknowledge external FPUs as you can get those processors with built in FPUs.

Sum A600 USB Keyboard Adaptor
PRODUCT DISCONTINUED
Sum A600 USB Keyboard adaptor is a USB interface for HID keyboards (ONLY) without the need for installing additional AmigaOS software drivers. Device's installation procedure consists of simply attaching it the U7 chip located on A600's motherboard. Additional feature of the adapter is its "Bootloader" function allowing future firmware upgrades.
Sum A600 USB comes with dedicated configuration mode, which becomes available when you by pressing both the Right-Shift + Pause keys together. User preferences are saved to the built-in EEPROM memory.
Key Features of the Sum A600
- Support for both USB HID and USB-PS / 2 keyboards (Not gaming or LED backlit keyboards).
- A600 compatibility (U7 chip-attached).
- Built-in USB stack.
- Configuration mode for PC keyboard (activated by R-Shift + Pause key combination),
- Configuration mode for Mac keyboard (activated by R-Shift + F19 key combination).
- Built-in EEPROM memory enabling user preferences storage.
- "Bootloader" function allowing future firmware upgrades.
- "Status" indicator LED providing information about device's state.
- built around 16-bit Microchip microcontroller utilizing nanoWatt technology.
- Non-blocking keyboard A600 - You can still use the inbuilt A600 keyboard.
Entering configuration mode (R-Shift + Pause)
- F1 - RESET type - software (A2000, A3000, A4000, CD32, CDTV) or hardware (A600, A1200),
- F2 - mapped Amiga Right to Alt Right,
- F10 - view keycode (on / off),
- F12 - display configuration
Amiga keys | USB keyboard |
---|---|
Amiga reset | CTRL + L-Win + R-Win CTRL + L-Alt + R-Alt CTRL + L-Alt + Del |
Help | F12 |
L-Amiga | L-Win |
R-Amiga | R-Win |

Refurbished Commodore Amiga 500 Custom
Commodore Amiga A500 – Professionally Refurbished White Edition
Technical Specifications- Motorola 68000 (7.14Mhz) CPU.
- 1Mb Ram (512k slow, 512k fast).
- 1.3 Kickstart Rom.
- Internal Gotek Drive with side OLED display
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.
- Brand new A500 Case White
- Brand new A1200.NET Keycaps (NOT Stickers) Black with a choice of UK/US/DE/FR Layouts



TF534 Accelerator for Amiga 500/2000
NO LONGER AVAILABLE - TF536 IS THE REPLACEMENT
TF534 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a ceramic Motorola 68030 CPU with an optional 68882 FPU clocked at 33mhz, 4MB of RAM, and a 2.5" IDE connector for an CF HDD Card. Full specs:- MC68030RP33B Processor
- 4MByte of fast-ram.
- 68882 FPU PLCC Socket (FPU option below)
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 – 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor

Checkmate 1500 Plus Amiga A1200 Build Service
Checkmate 1500 Plus Amiga A1200 Build Service where we can free up your Amiga 1200 in to a Checkmate 1500 case allowing you to expand your Amiga to new heights! We can also offer upgrades as part of the build and of course recapping services. The Checkmate 1500 Plus cases are same as the ones you can purchase directly from checkmate1500plus.com however we don't sell the cases individually, the case is however included as part of our build service.
What does our service include?
- A Checkmate 1500 Plus case (choice of Black or White).
- Amiga A1200 rear I/O Panel.
- Genuine Checkmate 1500 Plus 200W SFX PSU.
- Transplant of your existing A1200 board or purchase one of our refurbished boards.
- Installation of Amiga 1200 ATX Power adaptor kit.
- Transplant of existing A1200 Floppy Drive.
- Upgrade of Kickstart Rom to 3.1 (Licenced Cloanto)

Amiga 600 (A600) Reproduction Box
PRODUCT DISCONTINUED
Amiga 600 (A600) reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600 was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.

Amiga A4000 PSU Recapping Service
Amiga A4000 PSU recapping service - NOTE this is NOT a repair service.
- Removal of existing capacitors.
- Cleanup and preparation of area.
- Replace using Panasonic/Wurth/KEMET capacitors.
- Test output voltages (not under load)

72-Pin Simm Socket/Slot – Amiga 4000
72 Pin Simm Socket/Slot replacement for the Amiga 4000 Desktop
These are brand new and are the correct socket for the Commodore Amiga 4000 Desktop or the Amiga 4000 Replica project.
Specifications
- Pitch: 1.27 mm
- Termination Style: Through Hole
- Contact Plating: Tin
- Mounting Angle: 22 deg

Amiga A500 Composite/S-Video Output Module
Amiga A500 Composite/S-Video output module provides both Composite and and S-Video output via a extra PCB. This service provides the Composite/S-Video module and installation to your Amiga A500.
Installation does require the whole bottom half of the Amiga so the Composite/S-Video module can be installed.
What are the benefits of the Composite/S-Video module?
- No need for the large modulator sticking out of the back of the Amiga A500.
- Provides true composite video signal as the signal is directly from the RGB outputs.
- Provides true S-Video video signal as again is directly from the RGB outputs.
- Neat internal solution that provides both composite phono port and S-Video port (case modification is required and included in the service).

Amiga A500 Plus Replica Motherboard Fully Built
ITEM REPLACED BY THE RAEMIXX AMIGA A500
Amiga A500 Plus motherboard is a replica PCB of the A500 Plus REV 8.1 not to be confused with the A500 ++ (A500 Plus Plus). The A500 Plus replica is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
This is a fully built A500 Plus with all the custom chips and is plug and play, simply add your own kickstart rom.
What's included?
- Amiga A500 Plus populated motherboard.
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws

Amiga A500++ (Plus) Motherboard Part Built
Amiga A500++ (plus plus) motherboard part or fully built (NO CUSTOM CHIPS), these boards are brand new with 95% new parts (reused DB23 and floppy ports etc). Perfect replacement for a damaged Amiga Plus board or simply add to a collection.
Features
- Black PCB with gold finished pads/tracks
- Motherboard REV is based on the Amiga 500 Plus 8A
- /INT and /OVR signal lines connection points added
- Built in DF0/DF1 jumper