Amiga A600
Showing 37–48 of 52 resultsSorted by popularity
Amiga 600/1200 Gotek (FlashFloppy) with Printed Mount, 3 Digit
These units are a great replacement for your failing Amiga 1200 or Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing Amiga 1200/600 floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure it to the Amiga 1200/600.
You will need a USB memory stick (NOT included) with your loaded ADF files.
CA-PSU Amiga A500, A500 Plus, A600, A1200
CA-PSU Amiga A500, A500 Plus, A600, A1200 (CA-PSU stands for Compact Amiga Power Supply Unit), where "compact" designates the three target computers A500, A600 and A1200. It is the first power supply on the market that fully complies with the original Commodore specifications, introducing cable drop compensation for best regulation that even settles the voltage drop in the input filter of the target computers. This means that the voltage on the main 5V rail will never deviate more then 0.9%, measured inside the computer - no matter if the computer is in vanilla configuration or heavily expanded. Conventional power supplies will either supply too-high voltage to a vanilla machine, or too-low voltage to an expanded machine, causing malfunction or even defects. This cannot happen with our cable drop compensation technology.
Technical data in short:
- 5V, 5A, ripple/noise 50mV max. (typically 30mV)
- Overload on 5V tolerated up to 8A for 30 seconds
- 5V load regulation <0.6% typical, max. 0.9% under overload condition
- 12V up to 4A
- -12V, 0.1A
- Modern, high-efficiency DC-DC converter technology
- Total output power up to 60W
- Fanless, silent, extremely low heat
- Central Europe
- United Kingdom
- Australia
- USA
A630 REV 2 Accelerator Turbo Card A600 NO CPU
A630 Rev 2 Accelerator Turbo Card (NO CPU VERSION) for the Amiga 600 is a modern turbo card allows you to add your own 68030 CPU. We have tested both the Gold top and ceramic versions, however we do recommend a CPU cooler and fan for the ceramic versions. The speed boost is the sweet spot for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost!
Full specs:
- 128 Pin PGA Socket for the Motorola 68030 PGA CPU (CPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- Cooling: Passive or Active. No heatsink or fan is included, options are below.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2 or 3.2.1 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
AmigaOS 3.1.4 ROM Burning Service for Amiga A500/600/2000
AmigaOS 3.1.4 ROM Burning Service for Amiga A500, A600 & A2000, within this service we will burn the 3.1.4 Kickstart ROM file to a physical kickstart ROM which can be installed in your real Amiga 500/600/2000.
What you will receive:
- Physical 3.1.4 Kickstart ROM
The Process:
This service requires proof of your purchase of the digital version of AmigaOS 3.1.4 (for example screenshot of your purchase from the Hyperion website). Please note ONLY customers who already bought digital version of AmigaOS 3.1.4 can purchase this service. If the buyer is unable to provide proof of the purchase from the Hyperion website the transaction will be canceled and funds will be refunded minus any processing fees (if Paypal was used to purchase this service).Providing Proof:
We have provided a very easy way to upload proof of ownership below, simply upload a screenshot of confirmation of the order from the Hyperion website or a screenshot of the confirmation email using the upload tool below.
We are proud to be an official Hyperion reseller.
[paste_your_contact_form_7_shortcode_here]
Read more
Gotek Drive Pre-Flashed with FlashFloppy, a 0.96″ Display and Rotary Knob (Generic)
Gotek Drive 0.96" Display pre-flashed with FlashFloppy for and not limited to Acorn, Amstrad, Amiga, Apple, Atari, Spectrum, DOS / IBM XT PC, MSX.
This is the latest Gotek floppy emulator for retro computers with 3.5" floppy disk drive bay, or for use externally or in a caddy. This will also work Amstrad / Spectrum or computers with 3" disk drives or old PCs with 5.25" drives and such. You will require the correct floppy IDE or Ribbon connection cables and 3D printed mount. Most computers can use the ones supplied within the machine and you can do a straight swap out for the existing old floppy drive (such as in DOS PCs and Amigas) but some machines may need extra leads/connectors (such as Spectrum +3).
Flashed with current latest FlashFloppy firmware and ready to use. Once installed, just insert a USB memory stick with your disk images/files on. Your computer will then boot from this floppy emulator or can also use it as a second drive.
Comes complete with Rotary select knob and large 0.96 OLED display screen
List of compatible devices:
[accordion]
[pane title="Computers"]
Acorn Archimedes
Acorn BBC Micro
Amstrad CPC
Amstrad PCW
Amstrad PPC
Atari ST
Commodore Amiga
DEC
Dragon
IBM 3174
IBM PC
IBM PS/2
Kaypro
Memotech
MSX
NEC PC-98
Sharp
Sinclair QL
Spectrum
Tandy Color Computer
TI-99/4A
TSC Flex
UKNC, DVK
[/pane]
[pane title="Electronic Synthesizers"]
Akai
E-mu ESI-32
Ensoniq
General Music (GEM)
Korg
Kurzweil
Roland
Sequential Circuits Prophet 3000
Yamaha[/pane]
[pane title="Embedded & Industrial"]
KUKA
[/pane]
[/accordion]
A630 Rev 3 Accelerator 68030 50Mhz, 64Mb, FPU Amiga A600 PURPLE
A630 Rev 3 68030 50Mhz inc FPU Amiga A600 PURPLE EDITION is the latest revision of the A630 modern turbo card with the classic 68030 Motorola processor running at 50Mhz and also includes an onboard FPU. Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 - synchronous or asynchronous clocking.
- 64MB SDRAM Fast Ram.
- Cooling: Active included.
- PCMCIA Friendly.
- PCB Colour - Purple
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
A630 Rev 3 Accelerator (Bare board)
A630 Rev 3 Accelerator for the Amiga 600 is the latest revision of the A630 modern turbo card. designed for the the classic 68030 Motorola processor (NOT INCLUDED) running at 50Mhz and add an additional FPU (NOT INCLUDED). Perfect for that sweet spot in speed and usefulness for Demos, WHDLoad* gaming, internet and so on. This will give any A600 a great speedboost in a compact unit.
Full specs:
- CPU socket for the Motorola MC68030 clocked on 50MHz CPU (CPU NOT INCLUDED)
- FPU socket for the 68882FN40 (FPU NOT INCLUDED)
- 64MB SDRAM Fast Ram.
- PCMCIA Friendly.
Important Information:
MMULib's for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib's and it very important you use the right ones for the kickstart ROM you are using: 3.1 Kickstart: http://main.aminet.net/util/libs/MMULib.lha http://main.aminet.net/util/libs/MMULib.readme 3.2, 3.2.1 or 3.2.2 Install the MMULib package that came with the installation CD ONLY and NOT the ones from Aminet.Notes:
- Some demos or games may require disable "CPU CACHE" for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1 of which can be purchased below.
- The Oscillator will need some insulation tape put on top to stop the A630 touching it.
Commodore Amiga PSU for 1 x A500/600/1200 1 x CD32/A590 (DUO PLUS EDITION)
Commodore Amiga PSU DUO EDITION PLUS for 1 x A500/600/1200 and 1 x CD32/A590 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel for regular and accelerated Commodore Amiga A500, A500+, A600 and A1200.
The new Amiga PSU DUO PLUS Edition is a modern, 65W strong replacement power supply unit for the Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
- Stabilized +12VDC up to 1.0A rated output (per channel)
- Stabilized -12VDC up to 0.15A rated output (per channel)
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
- Double over current protection for all output lines
- Main AC power On/Off switch
- Two channel On/Off switches
- Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
- Eco friendly, green design: consumes ~20% less power compared to original PSU set
- Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
- Detachable AC cable (allowing you to use your own desired cable length).
- Weight only 0.3 KG
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
FURIA Amiga 600 accelerator (passive cooler)
FuriaEC020 is an accelerator card for Amiga 600 computers designed by Boris Krizma (Slovak Amiga HW developer) It's equipped with CPU Motorola MC68EC020/25 (OC33) MHz and FPU Motorola MC68882/40 MHz, and with onboard 9.5 megs of fast memory. The quick access to the memory makes this little card a real monster, as it makes the Amiga more than 10 times faster, than the original Amiga 600.
The card has also ability to map ROM into the Fast RAM, tested with 256 kB, 512 kB and also 1024 kB ROMs. The card also speeds up Amiga 600 IDE port. The device can be easily controlled by tool FuriaTune software written by Martin Kuchinka. To enable support for onboard PCMCIA port, you need to remove 4 megabytes of Fast RAM by pressing Control+Amiga+Amiga for 3 seconds.
Features:
- CPU 68EC020/25 MHz (OC33)
- FPU 68882
- 9.5MB Fast RAM
- Maprom function
- PCMCIA friendly
- Highest quality PLCC bottom socket - stable and solid FIT (AMPHENOL) - high temp resistant
- Firmware 14.1
- PCB colour may vary
Amiga 600 Case Badge – Vampire
Amiga 600 Case Badge - Vampire brand new, perfect replacement for any A600 case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 600 case!
Amiga 600 Gotek Drive, CLEAR/TRANSPARENT Mount, OLED Display and FlashFloppy
Amiga 600 Gotek drive is a great replacement for your failing Amiga 600 floppy drive or you wish to simply replace it with a Gotek drive. These are plug and play in that you simply remove your existing floppy drive and replace it with this unit (you use your existing bracket). 3 new screws will also be supplied to secure the Gotek drive to your Amiga.
You will need a USB memory stick (NOT included) with your loaded ADF files.
What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
What are ADF files?
ADF files is the standard Amiga Disk Format for floppy disk images. no different to Sega or Nintendo roms, ADF's are images of Amiga floppy disk games. Not only could you have access to a huge back catalogue of retro Amiga games, but there are still brand new games being released today, for example: Raid over Moscow or Bridge Strike these are all available as ADF files. But you not limited to games or programs, but you have access to tons of Amiga demos (if your into that scene).What are gotek drives in detail? Read here What is FlashFloppy check out this link Want to know even more about them, checkout retro32.com's review of them here Also checkout one of our favorite youtube streamers TheGebs24 and her views on the Gotek drive!
Sale!
£429.99 Original price was: £429.99.£386.99Current price is: £386.99. Ex. VAT
Read more
Amiga A600 Junior Motherboard Fully Built
Amiga A600 Junior motherboard, version June Bug Junior Rev 1.3.1. The Amiga A600 Junior is a reverse engineered A600 board by Róbert Tihanyi and is a full A600 board reimagind with some extras and modifications added.
A600 Junior is based on the Commodore A600 Rev 1.5 and has these enhancments:
-
Corrected PCB layout, removed “nowhere” traces.
-
Main Vcc rails stronger.
-
Informative silkscreen.
-
Values modified in audio (opamp) circuit, unior sounds better than a Rev1.5.
-
CXA2075M Video Encoder
-
DriveSelector. Like ReAmiga A1200 but it can handle all the 4 drives, DF0 to DF3. You can assign ANY DriveID to ANY physical drive.
-
R102 moved to backside. This is the “Vampore-resistor” which are the reasony why accelerator’s sockets needs to be grinded. You don’t have to grind anymore on a Jr. board.
-
HDD bay holes are now standard 3.0mm holes insted of the original oval. HDD cradles still can be used properly, but if not, you can also use them as mounting holes for accelerators. In this way, it is far more easy than on original boards.