Back to Modifications
Amiga 500 Plus Mainboard Remake RAEMIXX500 PART BUILT
£333.33 Ex. VAT
Amiga 500 Plus mainboard remake AKA Raemixx500 is a motherboard clone of the classic A500 Plus REV 8.1A made by SukkoPera and not to be confused with the A500 ++ (A500 Plus Plus). The Raemixx500 is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
The Raemixx500 board has had a few improvements added compared to the original A500 Plus board:
- Kickstart Switches – You can burn your Eproms and have 2 different kickstarts and use the jumpers or add switches to switch between kickstarts
- DF0 Switch – Again becoming a must for Amiga owners to have both a internal Gotek and external drive or vice-versa, best of both worlds!This is a fully built A500 Plus Raemixx500 board with all the custom chips and is plug and play, simply add your own kickstart rom or add one of the options below.
What’s included?
- Raemixx500 fully populated motherboard, NO Custom chips or ROM.
What’s not included?
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws
- Custom Chips
RED PCB
SKU: A500-RAMIXX-500
Categories: A500 Modifications, Modifications, Refurbished Units
Tags: A500, A500 Plus, A500 Plus Refurbished, A500 Refurbished, Amiga 500 Plus, raemixx500
You may also like…
TF536 Accelerator for Amiga 500/2000
TF536 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a gold top Motorola 68030 CPU clocked at 50mhz, 64MB of RAM, and a 2.5" IDE connector for an CF HDD Card.
Full specs:
- MC68030RC50C Processor
- 64MByte of fast-ram.
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF534 – 68030 Processor, 4Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
AmigaOS 3.2 CD-ROM Package for ALL Commodore Amigas
AmigaOS 3.2 CD-ROM for all Commodore Amiga's which includes:
- A500 / A500 Plus
- A600
- A1000
- A1200
- A2000 / A1500
- A3000 / A3000T
- A4000 / A4000T
- CDTV
Some of AmigaOS 3.2 features
- ReAction GUI toolkit integration
- Built-in ADF (Amiga disk file image) management
- Integrated Help subsystem
- Updated Data Type system
- Workbench and other user interface improvements
- Improved Tools, Utilities and System applications
- Enhanced Shell behavior
- New and reworked command set
- Touched up Preferences
- Polished MultiView
- Revamped Commodities
- Expanded BootMenu
- Inclusion and refinement of the AmigaOS 3.1.4 feature set
- Flexible delivery media
- Many more features to be listed
Minimum hardware requirements
- Kickstart ROM 3.2 (recommended), 3.1.4 , or older 3.1
- 2 MB of total memory. Total memory is calculated by adding Chip RAM and Fast RAM. Consider an additional half megabyte if you are not using a physical Kickstart ROM 3.2.
- 10 MB of free hard disk space.
AmigaOS 3.2.1 (Released December 2021)
Don't forget to register your copy on the Hyperon Website, once you do you can download the AmigaOS 3.2.1 update free of charge. Below are some of the highlights:Here are the highlights of the new features and fixes of AmigaOS 3.2.1:
- Fixes to almost every single gadget and image class
- Fix to clipboard.device that since AmigaOS 3.1.4 would not handle clips above 16KB in some cases
- Important fix to locale.library that would convert signed values to unsigned
- New IconEdit with support for colorful icons (like the “GlowIcons”)
- TextEdit has gained an ARexx port per open document
- ShowConfig had its GUI reworked, and can now make reports in AmigaGuide format
- The RAM disk linking feature have been changed a bit so it seems more like AmigaOS 3.1.4 while still being copy on read as in AmigaOS 3.2
- Dropping files on console will now activate the console window
- The screen will no longer remain black if you start up without any attached drive
- Eject menu item in Workbench;
... And much more you will find listed in the release-notes.
AmigaOS 3.2.1 Roms
No new ROM images are provided, you do not need any new ROMS. If you are already using some kind of MapROM solution or would like us to reburn your existing ROMS (free of charge, just postage back) then go ahead. But it is possible that more ROM changes be rolled out in AmigaOS 3.2.2 so for for now use the file-based update instead using the link above.AmigaOS 3.2.2 (Released March 2023)
AmigaOS 3.2.2 is available free of charge from the Hyperon website for those that have registered their copy of AmigaOS 3.2 via the Hyperon website. Here are the highlights of the new features and fixes of AmigaOS 3.2.2:AmigaOS 3.2.2 Roms
3.2.2 is a good step upgrade and it is recommended when you upgrade to 3.2.2 you also upgrade your roms to 3.2.2. NOTE: All roms are now 3.2.2 and if A1200 roms are slected will also have ehide.device We are proud to be an official Hyperion reseller.TF534 Accelerator for Amiga 500/2000
NO LONGER AVAILABLE - TF536 IS THE REPLACEMENT
TF534 accelerator a perfect upgrade for any Amiga A500, 500+ or A2000. Included is a ceramic Motorola 68030 CPU with an optional 68882 FPU clocked at 33mhz, 4MB of RAM, and a 2.5" IDE connector for an CF HDD Card. Full specs:- MC68030RP33B Processor
- 4MByte of fast-ram.
- 68882 FPU PLCC Socket (FPU option below)
- 44 Pin IDE connector
- Includes A500/A500+ CPU relocator
Prerequisites
- Kickstart ROM 3.1, 3.1.4, 3.2 to boot from IDE (available as an option below).
What is TerribleFire?
Well it’s not what it’s who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 – 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 – 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF536 – 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 – 68060 Processor other specs TBC for the Amiga CD32
- TF1260 – 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 – 68030 Processor 128Mb Ram and IDE interface for the Amiga 1200
- TF4060 – 68060 Processor 128Mb Ram for the Amiga 4000
- TF1200 – Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor
ReAmiga A1200 Refurbished Fully Built
ReAmiga A1200 Rev 1.5 Refurbishment Service built using an A1200 board the customer supplies as a donor*. The Re-Amiga A1200 is a reverse engineered board by John "Chucky" Hertell. and is a full A1200 board with some extras added which include:
- Composite Video area changed to a new decoder for improved quality.
- VGA Connector added, VGA monitor needs to support 15Khz!
- S-Video Connector for S-Video Out
- Kickstart switch built in, if you are using 27C800 Eproms. you can program one bank with one kickstart and the other bank with another.
- PCMCIA Reset fix.
- Optional IRQ7 Switch.
- Native PAL or NTSC Option (below)
- Added LED's for _RST, _KB_RST, _ODD_CIA, _EVEN_CIA and _ROMEN also to Serial TXD and RXD (from the 5V level).
- Added resistor to IDE Activity so now adapters that made IDE led always bright will be handled correctly.
- Added pads close to floppy connector for a 0Ohm resistor if you want to do the Escom floppy patch instead of a wire.
- 9 Pin Mouse Port
- Fits in your current metal shielding**
We reserve the right to cancel and refund any deposit made if we find an issues with securing any component or costs have increased to a level where building a unit becomes unaviable.
Related products
Amiga PicoPSU Adaptor – A500, A600, A1200
PRODUCT DISCONTINUED
Amiga PicoPSU Adaptor suitable for the A500/A600/A1200. The right angled connector provides a lower profile. You can operate the unit using a toggle or push to make switch.
A 90W PicoPSU power supply, with a 60W mains adaptor, has been sufficient to operate an Amiga 600 and Amiga 1200 with a 040 and CD-ROM.
PCB dimensions, 51x51mm
Does not include any PicoPSU.
Designed and built by Ian Stedman
Amiga 500 Case Badge – PiStorm Commodore
Amiga 500 Case Badge - PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!
Commodore Amiga PSU for A500 A500 Plus
Commodore Amiga PSU for A500 or A500 Plus, these are brand new and modern with It's 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 500, 500+ vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Amiga 500 Case Badge – PiStorm Boing Ball
Amiga 500 Case Badge - PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!