Back to A500 Plus Upgrades
Amiga PicoPSU Adaptor – A500, A600, A1200
£0.00 Ex. VAT
PRODUCT DISCONTINUED
Amiga PicoPSU Adaptor suitable for the A500/A600/A1200. The right angled connector provides a lower profile. You can operate the unit using a toggle or push to make switch.
A 90W PicoPSU power supply, with a 60W mains adaptor, has been sufficient to operate an Amiga 600 and Amiga 1200 with a 040 and CD-ROM.
PCB dimensions, 51x51mm
Does not include any PicoPSU.
Designed and built by Ian Stedman
OUT OF STOCK
SKU: IS-Amiga-picoPSU
Categories: A1200 Upgrades, A500 Plus Upgrades, A500 Upgrades, A600 Upgrades
Tags: A1200, A500, A600, Amiga PSU, picoPSU
Related products

Amiga 1200 Recapping Service (Standard)
Amiga 1200 recapping service, all board revisions (1A,1B,1D1,1D4,2B). NOTE this is NOT a repair service.
- Check the board before recapping is begun (any faults found before recapping will be reported back).
- Removal of existing electrolytic capacitors both SMD and through hole.
- Cleanup and preparation of areas.
- Replace using quality electrolytic capacitors.
- Retest (Video via RGB and Composite, Audio, Floppy Boot, CF Card boot).
- Bad audio, missing channels, low volume
- Slow boot up
- Guru errors or random crashing
[space_20]
When you receive your freshly recapped motherboard back [space_20] Once your board has been returned we strongly suggest testing the board before adding any accessories or putting it back in any shielding (if it was sent without its metal shielding) or case. Many issues arise when the board is then subjected to add-ons being added or put back together without first knowing the board was working in its bare minimum state (PSU, Video/Audio only). We offer 14 days from delivery to notify us of any issues with your recapped board of which we will send you a returns label so we can recheck our work. We do randomly take videos and photos of recapped boards to showcase our work to share on social media and other outlets. Return shipping is calculated at the checkout including £100 cover for loss or damage and we only use tracked services. [space_20] A little bit more about our Amiga recapping service and us! [space_20] We have been recapping Commodore Amiga computers since 2016 and have recapped over 400+ customer boards and 200+ of our own refurbished Amiga units, so you can rest assured that your board is in very safe hands. We use the correct tools and methods for removing old SMD and through-hole capacitors avoiding unnecessary stress being applied to the motherboard or the copper pads themselves. We offer ultrasonic PCB cleaning service where by the motherboard is bathed in a 60 °C deionised water bath combined with a PCB cleaner for 3 mins and then naturally dried for 24 hours. Results will vary depending on the condition of the board. When you receive your board back, you can rest assured your board will be in the best condition to allow you to install any upgrades you have in mind, weather that be a new TF1230, TF1260, PiStorm32-Lite or a simple 8Mb Ram card. And lastly, each board will have a sticker put on with the month/year it was recapped, what type of service was used and if it has been refurbished (ultrasonic clean) or repaired. [space_40]
Amiga 500 Case Badge – PiStorm Commodore
Amiga 500 Case Badge - PiStorm brand new, perfect replacement for any A500 or A500 Plus case. These are high quality prints finished off in a 3D gel, long lasting and look very smart! Smarten up your Amiga 500 case!

Amiga A500 Plus Replica Motherboard Fully Built
ITEM REPLACED BY THE RAEMIXX AMIGA A500
Amiga A500 Plus motherboard is a replica PCB of the A500 Plus REV 8.1 not to be confused with the A500 ++ (A500 Plus Plus). The A500 Plus replica is a good alternative to replace your existing broken A500 Plus board using your custom chips or one that is plug and play and soaked tested with all the custom chips included.
This is a fully built A500 Plus with all the custom chips and is plug and play, simply add your own kickstart rom.
What's included?
- Amiga A500 Plus populated motherboard.
- Both bottom and top shield
- Kickstart Rom
- Screws/Hex Screws

Refurbished Commodore Amiga 500 Unit
Commodore Amiga A500 – Professionally Refurbished & Recapped
Technical Specifications- Motorola 68000 (7.14Mhz) CPU
- 1Mb Chip Ram
- 1.3 Kickstart Rom
- 3.5" Floppy Drive
- UK Layout Keyboard
- Professionally refurbished Amiga A500 Unit (excluding mouse and PSU), these are options that can be added.


Images of the Amiga A500 is for illustrative purposes only, each unit will show signs of age and use. If you want photos of the Amiga 500 we have please contact us.
As these are custom built they can take between 21/28 working days depending on what add-ons are added and workload. So please do not order if you are not able to wait - Deposits are not refundable