Back to Amiga A1200
Amiga 1200 Reproduction Box Magic Pack
£41.66 Ex. VAT
Amiga 1200 reproduction box Magic Pack, these are brand new and designed to be used as box art or to house your Amiga A1200. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 1200 was shipped.
Key features:
- Box is true to the original size and design.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following:
Please note: This is an Amiga 1200 Magic Pack reproduction box and NOT AN ORIGINAL.
OUT OF STOCK
Categories: A1200 Upgrades, Amiga A1200
Related products

ScanPlus AGA – Amiga 1200 and Amiga 4000D Scandoubler
ScanPlus AGA is a internal Scandoubler for the Amiga 1200 and Amiga 4000D (not Amiga 4000T or Amiga CD32). The advantage of the internal ScanPlus AGA is that it will allow you to connect to a standard VGA monitor whether that be a traditional (best) CRT experience or a flat screen monitor or TV with VGA connector.
The primary PCB sits over the Lisa chip and the smaller PCB sits over the Alice chip. Output connector connects to a VGA socket which sits in a 3D printed backplate which is included (available in white or black, please note white will be sent if no note is made asking for black).
ScanPlus is plug and play, no drivers or setting up required, it will work straight out of the box, all Amiga screen modes are available via the VGA connector, these include Multiscan, PAL, NTSC, DoublePAL DoubleNTSC, Euro36, Euro72, Super72. It provides smooth 50-60 Hz and up to 24 bit colour depth.
What's included:
- ScanPlus AGA (Lisa and Alice PCB's).
- VGA breakout socket.
- White Backplate for VGA socket (please but a note on the order to ask for Black if required instead).
- Ribbon cable to connect to VGA socket.
- Link cable to Alice PCB.
- DPMS screensaver utility included - Download here
- Item is brand new.
- Installation guide is here
Note:
- Not retail boxed.
- Requires some knowledge of Amiga hardware when installing, fitting service available if required, ask for details.

Amiga 600/1200 Gotek OLED Display Header Only
*This unit is if you already have a FlashFloppy Gotek drive.
The Amiga 600/1200 FlashFloppy OLED header unit is the perfect companion for the Amiga 600/1200 Gotek FlashFloppy. It allows easy viewing the current ADF file loaded on the Gotek. This requires zero hacking of your Amiga case. These units are ready built and are very easy to install.
What you will receive:
- 3D Printed Header
- OLED Display
- 30cm of cable from the header to the Gotek drive.

Commodore Amiga PSU for A1200 (BOOST VERSION)
Commodore Amiga PSU for A1200 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).

TF1232 Amiga Accelerator 64Mb
TF1232 Amiga Accelerator - Terriblefire for the Amiga 1200 which hosts a 68030 processor running at 50Mhz coupled with 128mb of fast ram. This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed.This card is a perfect add-on for the Amiga A1200 and is the sweet spot between cost and speed. And is the next step up after the 11Mb Ex1T Fast Ram or if your budget does not quite stretch to the Terriblefire TF1260, the TF1230 A1200 card is the perfect add-on and you will notice a huge speed difference.
- 68030 'Gold' CPU running at 50MHZ (NOT OVERCLOCKED) with MMU
- 64Mb Fast Ram
- IDE Interface - Driver required - ehide.device or purchase our AmigaOS 3.2 Rom with ehide.device built in (uploading of AmigaOS purchase evidence required)
- Fits in your old/new stock A1200 case!!!
Prerequisites
- Timing fix is strongly recommended on your A1200 motherboard. We can do this free of charge if you send your board to us (return shipping does need to be covered).
- Kickstart ROM 3.1, 3.1.4, 3.2, 3.x or 3.9 (not compatible with 3.0).
- Some boards do not have a chamfered edge on the connector (1A and 1B boards) which may bend the connector pins, if your unsure please ask.
What is TerribleFire?
Well it's not what it's who, and that person is Stephen Leary who has designed a whole host of accelerators and ram cards for the Amiga A500, A1200 and Amiga CD32. These include many but the most common ones are:- TF328 - 8Mb Fast Ram board and IDE socket for the Amiga CD32
- TF330 - 68030 Processor, 64Mb Fast Ram and IDE socket for the Amiga CD32
- TF534 - 68030 Processor, 4Mb Ram, IDE Interface and FPU Socket for A500/A500 Plus and A2000
- TF536 - 68030 Processor, 64Mb Ram and IDE interface for the Amiga A500 and A500 Plus
- TF360 - 68060 Processor other specs TBC for the Amiga CD32
- TF1260 - 68060 Processor, 128Mb Ram and IDE Interface for the Amiga 1200
- TF1230 - 68030 Processor 64Mb Ram amd IDE interface for the Amiga 1200
- TF4060 - 68060 Processot 128Mb Ram for the Amiga 4000
- TF1200 - Buffee Adaptor + 5.5Mb/8Mb (you will need the new Buffee Processor