Back to A600 Upgrades
Commodore Amiga PSU for A600
£45.83 Ex. VAT
Commodore Amiga PSU for A600, these are brand new and modern with It’s 50W (55W peak) of total combined output power making it nearly 2x times stronger than original Commodore Amiga PSU and 2x smaller in dimensions & weight.
Key features:
- Stabilized & filtered 5VDC up to 4A output (4.4A peak)
- Stabilized & filtered 12VDC up to 2A output (2.2A peak)
- Stabilized & filtered -12VDC up to 0.5A output (0.55A peak)
- Carefully calibrated for Amiga 500 reference load
- Active & passive over voltage protection for main +5VDC line
- Over current protection for all output lines
- Fully isolated & fused on AC side
- Power On/Off switch
- Long output cable (1.8m) with rectangular DIN 5-pin plug.
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- Runs COLD!
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- Manufactured by Electroware
- UK Stock
Warning!
Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it’s not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values.
This replacement Amiga PSU has been designed for Commodore Amiga 600 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it’s not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system’s potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it’s >30 years old).
OUT OF STOCK
Email me when stock is available
You may also like…
&url=https://www.retropassion.co.uk/product/commodore-amiga-psu-a500-600-1200-duo-plus/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2022/06/commodore-amiga-a500-a600-a1200-a590-cd32-psu-duo-plus-4.jpg?fit=800%2C800&ssl=1){kind=link}
Commodore Amiga PSU for 2 x A500/600/1200 (DUO PLUS)
Commodore Amiga PSU DUO EDITION PLUS for 2 x A500/A600/A1200 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel forregular and accelerated Commodore Amiga A500, A500+, A600 and A1200.
The new Amiga PSU DUO Edition is a modern, 65W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
- Stabilized +12VDC up to 1.0A rated output (per channel)
- Stabilized -12VDC up to 0.15A rated output (per channel)
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
- Double over current protection for all output lines
- Main AC power On/Off switch
- Two channel On/Off switches
- Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
- Eco friendly, green design: consumes ~20% less power compared to original PSU set
- Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
- Detachable AC cable (allowing you to use your own desired cable length).
- Weight only 0.3 KG
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
&url=https://www.retropassion.co.uk/product/amiga-psu-a600-boost/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/07/Amiga_003_M_640.jpg?fit=640%2C480&ssl=1){kind=link}
Commodore Amiga PSU for A600 (BOOST VERSION)
Commodore Amiga PSU for A600 BOOST VERSION, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU BOOST is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems. Based on our famous Amiga DUO/DUO+ PSU experiences provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or Furia accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Commodore Amiga 500, 500+, 600, 1200 compatible
- Stabilized & filtered 5VDC up to 8A output (peak)
- Stabilized & filtered 12VDC up to 0.5A output
- Stabilized & filtered -12VDC up to 0.15A output
- 5VDC manual adjustment feature (potentiometer)
- Factory calibrated for stock Amiga 500 reference load
- Active & passive over voltage protections for main +5VDC line
- Over current protection for all output lines
- Integrates Protection & Adjustment LED Module add-on
- Fully isolated & fused on AC side
- Durable power On/Off switch (black)
- Status LED (Good Status Green)
- Long output cable (1.8m) with rectangular DIN 5-pin plug
- Detachable input AC cable for all versions (cable included)
- Weight only 0.4 KG (2x less than original PSU)
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
&url=https://www.retropassion.co.uk/product/commodore-amiga-psu-duo-a500-cd32/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/08/Amiga-PSU-DUO-Amiga-A500-600-1200-and-CD32.jpg?fit=1024%2C1024&ssl=1){kind=link}
Commodore Amiga PSU for A500/600/1200 & CD32 (DUO Edition)
Commodore Amiga PSU DUO EDITION for 1 x A500/A600/A1200 and 1 x Amiga CD32 up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200 and Amiga CD32.
The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- 1 x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
- 1 x CD32/A590 compatible (round 4pin DIN plug)
- Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
- Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
- Stabilized -12VDC up to 0.15A rated output
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
- Double over current protection, individual for each output
- Durable main AC power On/Off switch
- Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
- Eco friendly design: consumes ~20% less power compared to original PSU set
- Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
- Detachable input AC cable allowing you to use your own desired cable length (cable included)
- Weight only 0.3 KG
- Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
- Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
&url=https://www.retropassion.co.uk/product/commodore-amiga-psu-for-1-x-a500-600-1200-1-x-cd32-a590-duo-plus-edition/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2022/06/commodore-amiga-a500-a600-a1200-a590-cd32-psu-duo-plus-4.jpg?fit=800%2C800&ssl=1){kind=link}
Commodore Amiga PSU for 1 x A500/600/1200 1 x CD32/A590 (DUO PLUS EDITION)
Commodore Amiga PSU DUO EDITION PLUS for 1 x A500/600/1200 and 1 x CD32/A590 with the ability switch them on and off independently up to 4.0A per 5VDC channel with independent 5VDC adjustments per channel for regular and accelerated Commodore Amiga A500, A500+, A600 and A1200.
The new Amiga PSU DUO PLUS Edition is a modern, 65W strong replacement power supply unit for the Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 4.0A), +12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA, TF536, TF1230. TF1260 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- Stabilized, double protected +5VDC up to 4.0A rated output (per channel)
- Stabilized +12VDC up to 1.0A rated output (per channel)
- Stabilized -12VDC up to 0.15A rated output (per channel)
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) on every channel
- Double over current protection for all output lines
- Main AC power On/Off switch
- Two channel On/Off switches
- Each channel has a set of LED power good indicators (green 5VDC, yellow 12VDC, blue -12VDC).
- Eco friendly, green design: consumes ~20% less power compared to original PSU set
- Output cable length (1.5m) regular Amiga or CD32/A590 compatible.
- Detachable AC cable (allowing you to use your own desired cable length).
- Weight only 0.3 KG
- Safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
&url=https://www.retropassion.co.uk/product/commodore-amiga-psu-for-a500-600-1200-duo-edition/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/08/Amiga-PSU-DUO-Amiga-A500-600-1200-and-CD32.jpg?fit=1024%2C1024&ssl=1){kind=link}
Commodore Amiga PSU for 2 x A500/600/1200 (DUO EDITION)
Commodore Amiga PSU DUO EDITION for 2 x A500/A600/A1200, up to 8A at 5VDC strong, adjustable PSU for regular and accelerated Commodore Amiga A500, A500+, A600, A1200.
The new Amiga PSU DUO Edition is a modern, 50W strong replacement power supply unit for Commodore Amiga computer systems.provides stable, filtered, adjustable 5VDC (up to 8.0A), 12VDC (up to 0.5A) and -12VDC (up to 0.15A) by industrial grade components. Now your Vampire, Blizzard, ACA or TF536 accelerator will get enough juice to work flawlessly with full MHz clocks. Factory trimmed for stock Amiga 500 reference load, may be adjusted to give exact 5VDC with 2-3x heavier loads.
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Key features:
- 2 x A500 A500+ A600 A1200 compatible (rectangular 5pin DIN plug)
- Stabilized, double protected +5VDC up to 8.0A rated output (total, 4A per channel max)
- Stabilized +12VDC up to 1.2A rated output (0.6A per channel max)
- Stabilized -12VDC up to 0.15A rated output
- Trim potentiometer for 5VDC fine adjustments (5-5.5V range) common for both outputs
- Double over current protection, individual for each output
- Durable main AC power On/Off switch
- Set of LED status indicators (green 5VDC, yellow 12VDC, blue -12VDC)
- Eco friendly design: consumes ~20% less power compared to original PSU set
- Configurable set of detachable output cables. Versions for regular Amiga 500/600/1200 or CD32/A590 are available (1.6 m length)
- Detachable input AC cable allowing you to use your own desired cable length (cable included)
- Weight only 0.3 KG
- Universal AC input range to support all worldwide power standards (accepts 110-240 VAC)
- Meets safety standards: UL60950-1, TUV EN60950-1, ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1
- UK Stock
Warning! Risk of electrical shock and energy hazard when opened. All failures should be examined by a qualified technicians only. Risk of fire or electrical shock. The ventilation holes should be protected from foreign objects or dripping liquids. Please do not install power supplies in places with high ambient temperature or close to the heat source. Enclosed power supplies are intent to work in indoor locations, it's not allowed to use power supplies outdoor, in dust or high moisture. Output current and output wattage must not exceed the rated values. This replacement Amiga PSU has been designed for Commodore Amiga 1200 vintage computer systems only and should be considered as an integral component of Amiga computer system. Do not connect to any other devices as it's not a general purpose PSU. Manufacturer is not responsible for any consequences of unauthorised or arbitrary repairs, modifications or incorrect usage. Please notice that new, properly working replacement Amiga PSU is reducing the system's potential fail rate but still is not guaranteeing that entire Amiga system will work correctly (it's >30 years old).
Related products
&url=https://www.retropassion.co.uk/product/amiga-a600-9-5mb-fast-ram-pcmcia-switchable-a6095/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2020/02/6095.png?fit=1024%2C768&ssl=1){kind=link}
Amiga A600 9.5Mb Fast Ram (PCMCIA switchable)
Stock arriving March 2021
Amiga A600 9.5Mb Fast Ram card is PCMCIA friendly using a jumper to switch to 4mb also these these cards have these further jumper options:- ON/OFF - You can enable or disable the card.
- Transferring files from your PC/MAC using the a PCMCIA CF card adaptor
- Plug in a Ethernet card to transfer files from a PC/MAC via FTP
- Adding a CD Drive that has a PCMCIA interface
We also supply the AMIGA 600 A608 MINI FAST RAM CARD
Amiga 600 Reproduction Box – Wild Weird Wicked
PRODUCT DISCONTINUED
Amiga 600 reproduction box - Wild Weird Wicked, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original Amiga 600 boxes created by plakativ-druck.ch.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 reproduction box and NOT AN ORIGINAL.
%20Reproduction%20Box&url=https://www.retropassion.co.uk/product/amiga-600-reproduction-box/&media=https://i0.wp.com/www.retropassion.co.uk/wp-content/uploads/2021/08/IMG_1672-scaled.jpg?fit=1024%2C683&ssl=1){kind=link}
Amiga 600 (A600) Reproduction Box
PRODUCT DISCONTINUED
Amiga 600 (A600) reproduction box, these are brand new and designed to be used as box art or to house your Amiga A600. These are true reproductions of the original boxes created by plakativ-druck.ch used when the Amiga 600 was shipped.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Key features:
- Box is true to the original size and design.
- Including "Innards" for positioning the Amiga A600 computer and accessories.
- Laminated outside / moisture repellent.
- Will be delivered flat in a large envelope.
We also offer Amiga Reproduction boxes for the following: Commodore Amiga A1200 Commodore Amiga A600 Commodore Amiga A500 Commodore Amiga A500 Plus Commodore Amiga CD32 Please note: This is an Amiga 600 (A600) reproduction box and NOT AN ORIGINAL. NO LONGER BEING PRODUCED.
Amiga A600 1Mb Chip Ram Memory Expansion
Amiga A600 1Mb Chip Ram upgrade fits in the trapdoor of the Amiga 600. These cards are brand new and perfect in giving your Amiga 600 a little boost and compliments the Amiga 600 8Mb Fast ram upgrade as 2Mb chip ram is recommended if your looking to start using WHDLoad.
What is WHDLoad?
WHDLoad is a a solution where by the user can install hundreds of Amiga games on to a HDD/CF or SD card even if the game originally did not have the option of installing the game on to the internal HDD/CF/SD card. The vast majority of games have already been converted ready to go or you can create them yourself if you have the original game on a floppy disk/s. Also many great Amiga demos have been converted for WHDLoad.
1 Year RTB Warranty.